AMC UBACKPLANE SFP
OHWR0030 · revision R1
AMC UBACKPLANE SFP (OHWR0030 R1) is an open-hardware circuit board from the CERN Open Hardware Repository, designed in Altium Designer: a 4-layer board of 245 × 158 mm with 292 components and 359 nets, published under CERN-OHL-1.1.
review 92% walked · 19 findings: 1 blocker · 6 major · 12 minor (217 items)
Open in the interactive viewerRead the full review

Design review
Probe recorded 19 findings: 1 blocker · 6 major · 12 minor (217 items) on this design. Each is shown here with its reasoning; the full review links every one to the pins, nets and datasheet pages it rests on.
- NetCopperSplitblockerOpen
NetCopperSplit: 196 boards×196
e.g. “BOOT's copper is in 3 pieces: JP2.8 and 1 other piece(s) are not connected to the rest of the net” · 196 different statements
At split:BOOT, split:DE1, split:DE2, split:DE3, split:DE4, split:DE5 and 190 more
Each finding, with its own headline — 100 of 196 shown
split:BOOTBOOT's copper is in 3 pieces: JP2.8 and 1 other piece(s) are not connected to the rest of the net
BOOT's copper is in 3 pieces: JP2.8 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC1.53, on TOP_LAYER, over (254.88, 11.49) to (255.13, 12.51). Piece 2: JP2.8, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (188.43, 23.31) to (189.23, 24.11). Piece 3: R19.1, on TOP_LAYER, over (189.26, 35.13) to (189.84, 35.75). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE1DE1's copper is in 4 pieces: IC6.12 and 2 other piece(s) are not connected to the rest of the net
DE1's copper is in 4 pieces: IC6.12 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC6.21, on TOP_LAYER, over (-118.02, -18.8) to (-117.77, -18.1). Piece 2: IC6.12, on TOP_LAYER, over (-122.94, -17.88) to (-122.24, -17.63). Piece 3: R35.1, on TOP_LAYER, over (291.49, -55.61) to (292.11, -55.03). Piece 4: IC5.4, on TOP_LAYER, over (242.64, -59.11) to (244.64, -58.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE2DE2's copper is in 4 pieces: IC6.8 and 2 other piece(s) are not connected to the rest of the net
DE2's copper is in 4 pieces: IC6.8 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC6.19, on TOP_LAYER, over (-119.02, -18.8) to (-118.77, -18.1). Piece 2: IC6.8, on TOP_LAYER, over (-122.94, -15.88) to (-122.24, -15.63). Piece 3: R37.1, on TOP_LAYER, over (267.38, -55.61) to (268, -55.03). Piece 4: IC5.5, on TOP_LAYER, over (242.64, -60.38) to (244.64, -59.78). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE3DE3's copper is in 4 pieces: IC6.5 and 2 other piece(s) are not connected to the rest of the net
DE3's copper is in 4 pieces: IC6.5 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC6.42, on TOP_LAYER, over (-119.02, -11.9) to (-118.77, -11.2). Piece 2: IC6.5, on TOP_LAYER, over (-122.94, -14.38) to (-122.24, -14.13). Piece 3: R39.1, on TOP_LAYER, over (230.17, -55.61) to (230.79, -55.03). Piece 4: IC5.6, on TOP_LAYER, over (242.64, -61.65) to (244.64, -61.05). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE4DE4's copper is in 4 pieces: IC6.1 and 2 other piece(s) are not connected to the rest of the net
DE4's copper is in 4 pieces: IC6.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC6.40, on TOP_LAYER, over (-118.02, -11.9) to (-117.77, -11.2). Piece 2: IC6.1, on TOP_LAYER, over (-122.94, -12.38) to (-122.24, -12.13). Piece 3: R41.1, on TOP_LAYER, over (206.57, -55.61) to (207.19, -55.03). Piece 4: IC5.7, on TOP_LAYER, over (242.64, -62.92) to (244.64, -62.32). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE5DE5's copper is in 4 pieces: IC7.12 and 2 other piece(s) are not connected to the rest of the net
DE5's copper is in 4 pieces: IC7.12 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC7.21, on TOP_LAYER, over (-119.02, 17.2) to (-118.77, 17.9). Piece 2: IC7.12, on TOP_LAYER, over (-123.94, 18.13) to (-123.24, 18.38). Piece 3: R43.1, on TOP_LAYER, over (182.49, -55.61) to (183.11, -55.03). Piece 4: IC5.9, on TOP_LAYER, over (251.94, -64.19) to (253.94, -63.59). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE6DE6's copper is in 4 pieces: IC7.8 and 2 other piece(s) are not connected to the rest of the net
DE6's copper is in 4 pieces: IC7.8 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC7.19, on TOP_LAYER, over (-120.02, 17.2) to (-119.77, 17.9). Piece 2: IC7.8, on TOP_LAYER, over (-123.94, 20.13) to (-123.24, 20.38). Piece 3: R45.1, on TOP_LAYER, over (149.53, -55.61) to (150.15, -55.03). Piece 4: IC5.10, on TOP_LAYER, over (251.94, -62.92) to (253.94, -62.32). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE7DE7's copper is in 4 pieces: IC7.5 and 2 other piece(s) are not connected to the rest of the net
DE7's copper is in 4 pieces: IC7.5 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC7.42, on TOP_LAYER, over (-120.02, 24.1) to (-119.77, 24.8). Piece 2: IC7.5, on TOP_LAYER, over (-123.94, 21.63) to (-123.24, 21.88). Piece 3: R47.1, on TOP_LAYER, over (116.58, -55.61) to (117.2, -55.03). Piece 4: IC5.11, on TOP_LAYER, over (251.94, -61.65) to (253.94, -61.05). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DE8DE8's copper is in 4 pieces: IC7.1 and 2 other piece(s) are not connected to the rest of the net
DE8's copper is in 4 pieces: IC7.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: IC7.40, on TOP_LAYER, over (-119.02, 24.1) to (-118.77, 24.8). Piece 2: IC7.1, on TOP_LAYER, over (-123.94, 23.63) to (-123.24, 23.88). Piece 3: R49.1, on TOP_LAYER, over (83.61, -55.61) to (84.23, -55.03). Piece 4: IC5.12, on TOP_LAYER, over (251.94, -60.38) to (253.94, -59.78). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR1DR1's copper is in 3 pieces: IC6.25 and 1 other piece(s) are not connected to the rest of the net
DR1's copper is in 3 pieces: IC6.25 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC6.26, on TOP_LAYER, over (-116.04, -17.38) to (-115.34, -17.13). Piece 2: IC6.25, on TOP_LAYER, over (-116.04, -17.88) to (-115.34, -17.63). Piece 3: J4.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-182.1, -17.1) to (-179.9, -14.9). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR2DR2's copper is in 3 pieces: IC6.28 and 1 other piece(s) are not connected to the rest of the net
DR2's copper is in 3 pieces: IC6.28 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC6.29, on TOP_LAYER, over (-116.04, -15.88) to (-115.34, -15.63). Piece 2: IC6.28, on TOP_LAYER, over (-116.04, -16.38) to (-115.34, -16.13). Piece 3: J6.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, -21.1) to (-136.04, -18.9). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR3DR3's copper is in 3 pieces: IC6.32 and 1 other piece(s) are not connected to the rest of the net
DR3's copper is in 3 pieces: IC6.32 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC6.33, on TOP_LAYER, over (-116.04, -13.88) to (-115.34, -13.63). Piece 2: IC6.32, on TOP_LAYER, over (-116.04, -14.38) to (-115.34, -14.13). Piece 3: J7.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, -12.1) to (-136.04, -9.9). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR4DR4's copper is in 3 pieces: IC6.35 and 1 other piece(s) are not connected to the rest of the net
DR4's copper is in 3 pieces: IC6.35 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC6.36, on TOP_LAYER, over (-116.04, -12.38) to (-115.34, -12.13). Piece 2: IC6.35, on TOP_LAYER, over (-116.04, -12.88) to (-115.34, -12.63). Piece 3: J8.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, -3.1) to (-136.04, -0.9). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR5DR5's copper is in 3 pieces: IC7.26 and 1 other piece(s) are not connected to the rest of the net
DR5's copper is in 3 pieces: IC7.26 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC7.25, on TOP_LAYER, over (-117.04, 18.13) to (-116.34, 18.38). Piece 2: IC7.26, on TOP_LAYER, over (-117.04, 18.63) to (-116.34, 18.88). Piece 3: J9.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, 5.9) to (-136.04, 8.1). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR6DR6's copper is in 3 pieces: IC7.29 and 1 other piece(s) are not connected to the rest of the net
DR6's copper is in 3 pieces: IC7.29 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC7.28, on TOP_LAYER, over (-117.04, 19.63) to (-116.34, 19.88). Piece 2: IC7.29, on TOP_LAYER, over (-117.04, 20.13) to (-116.34, 20.38). Piece 3: J10.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, 14.9) to (-136.04, 17.1). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR7DR7's copper is in 3 pieces: IC7.33 and 1 other piece(s) are not connected to the rest of the net
DR7's copper is in 3 pieces: IC7.33 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC7.32, on TOP_LAYER, over (-117.04, 21.63) to (-116.34, 21.88). Piece 2: IC7.33, on TOP_LAYER, over (-117.04, 22.13) to (-116.34, 22.38). Piece 3: J11.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, 23.9) to (-136.04, 26.1). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:DR8DR8's copper is in 3 pieces: IC7.36 and 1 other piece(s) are not connected to the rest of the net
DR8's copper is in 3 pieces: IC7.36 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC7.35, on TOP_LAYER, over (-117.04, 23.13) to (-116.34, 23.38). Piece 2: IC7.36, on TOP_LAYER, over (-117.04, 23.63) to (-116.34, 23.88). Piece 3: J12.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.24, 32.9) to (-136.04, 35.1). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:EN_AMC1_PWREN_AMC1_PWR's copper is in 2 pieces: R305.2 is not connected to the rest of the net
EN_AMC1_PWR's copper is in 2 pieces: R305.2 is not connected to the rest of the net. Piece 1: Q14.1, on TOP_LAYER, over (-84.96, -127.73) to (-83.91, -127.08). Piece 2: R305.2, on TOP_LAYER, over (-107.84, -136.74) to (-107.24, -136.14). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:EN_AMC2_PWREN_AMC2_PWR's copper is in 2 pieces: R53.2 is not connected to the rest of the net
EN_AMC2_PWR's copper is in 2 pieces: R53.2 is not connected to the rest of the net. Piece 1: Q2.1, on TOP_LAYER, over (-80.4, -127.73) to (-79.35, -127.08). Piece 2: R53.2, on TOP_LAYER, over (-112.22, -136.74) to (-111.62, -136.14). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:FCLKAA_NFCLKAA_N's copper is in 2 pieces: J1A.81 is not connected to the rest of the net
FCLKAA_N's copper is in 2 pieces: J1A.81 is not connected to the rest of the net. Piece 1: J1B.81, on TOP_LAYER, over (59.79, -28.7) to (60.94, -28.3). Piece 2: J1A.81, on TOP_LAYER, over (90.27, -28.7) to (91.42, -28.3). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:FCLKAA_PFCLKAA_P's copper is in 2 pieces: J1A.80 is not connected to the rest of the net
FCLKAA_P's copper is in 2 pieces: J1A.80 is not connected to the rest of the net. Piece 1: J1B.80, on TOP_LAYER, over (59.79, -27.95) to (60.94, -27.55). Piece 2: J1A.80, on TOP_LAYER, over (90.27, -27.95) to (91.42, -27.55). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:GA0AGA0A's copper is in 368 pieces: J5D.17 and 366 other piece(s) are not connected to the rest of the net
GA0A's copper is in 368 pieces: J5D.17 and 366 other piece(s) are not connected to the rest of the net. Piece 1: J5D.20, on TOP_LAYER, over (-8.33, -200.8) to (-6.33, -200.3). Piece 2: J5D.17, on TOP_LAYER, over (-8.33, -203.2) to (-6.33, -202.7). Piece 3: J5D.14, on TOP_LAYER, over (-8.33, -205.6) to (-6.33, -205.1). Piece 4: J5D.11, on TOP_LAYER, over (-8.33, -208) to (-6.33, -207.5). Piece 5: J5D.1, on TOP_LAYER, over (-16.53, -201.2) to (-14.53, -200.7). Piece 6: J5D.10, on TOP_LAYER, over (-16.53, -208.4) to (-14.53, -207.9). Piece 7: C202D.1, on TOP_LAYER, over (-18.14, -105.02) to (-17.52, -104.4). Piece 8: C202B.1, on TOP_LAYER, over (-18.27, -62.3) to (-17.65, -61.68). Piece 9: C202C.1, on TOP_LAYER, over (-18.27, -76.56) to (-17.65, -75.94). Piece 10: C202A.1, on TOP_LAYER, over (-18.27, -90.67) to (-17.65, -90.05). Piece 11: C220D.2, on TOP_LAYER, over (-19.11, -109.3) to (-18.06, -107.9). Piece 12: C220B.2, on TOP_LAYER, over (-19.24, -66.58) to (-18.19, -65.18). Piece 13: C220C.2, on TOP_LAYER, over (-19.24, -80.83) to (-18.19, -79.43). Piece 14: C220A.2, on TOP_LAYER, over (-19.24, -94.94) to (-18.19, -93.54). Piece 15: R55.1, on TOP_LAYER, over (-71.75, -129.08) to (-70.75, -128.18). Piece 16: C53.1, on TOP_LAYER, over (-75.87, -129.16) to (-74.87, -128.21). Piece 17: C24.1, on TOP_LAYER, over (-78.83, -28.02) to (-78.21, -27.4). Piece 18: Q2.2, on TOP_LAYER, over (-80.4, -129.63) to (-79.35, -128.98). Piece 19: C28.1, on TOP_LAYER, over (-80.39, -28.02) to (-79.77, -27.4). Piece 20: C26.1, on TOP_LAYER, over (-81.95, -28.02) to (-81.33, -27.4). Piece 21: C16.1, on TOP_LAYER, over (-83.51, -28.02) to (-82.89, -27.4). Piece 22: C22.2, on TOP_LAYER, over (-84.4, -45.4) to (-82.05, -43.15). Piece 23: C27.2, on TOP_LAYER, over (-84.4, -49.49) to (-82.05, -47.24). Piece 24: C29.2, on TOP_LAYER, over (-84.43, -41.49) to (-82.08, -39.24). Piece 25: Q14.2, on TOP_LAYER, over (-84.96, -129.63) to (-83.91, -128.98). Piece 26: C15.1, on TOP_LAYER, over (-85.07, -28.02) to (-84.45, -27.4). Piece 27: C54.2, on TOP_LAYER, over (-86.37, -108.28) to (-83.92, -105.93). Piece 28: C25.2, on TOP_LAYER, over (-87.32, -32.7) to (-84.97, -30.45). Piece 29: C18.1, on TOP_LAYER, over (-86.62, -28.02) to (-86, -27.4). Piece 30: C55.2, on TOP_LAYER, over (-91.37, -108.28) to (-88.92, -105.93). Piece 31: C23.1, on TOP_LAYER, over (-91.07, -30.43) to (-90.45, -29.81). Piece 32: C20.1, on TOP_LAYER, over (-92.63, -30.43) to (-92.01, -29.81). Piece 33: D2.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-97.19, -114.21) to (-95.09, -112.11). Piece 34: CON2.5, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-105.3, -98.42) to (-103.47, -96.59). Piece 35: Cage3.12, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-106.86, -188.41) to (-104.36, -185.91). Piece 36: Cage3.11, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-106.89, -195.6) to (-104.39, -193.1). Piece 37: CON2.6, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-107.8, -100.92) to (-105.97, -99.09). Piece 38: R305.1, on TOP_LAYER, over (-107.84, -137.64) to (-107.24, -137.04). Piece 39: Cage3.17, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-109.81, -181.2) to (-107.31, -178.7). Piece 40: CON2.7, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-112.8, -100.92) to (-110.97, -99.09). Piece 41: R53.1, on TOP_LAYER, over (-112.22, -137.64) to (-111.62, -137.04). Piece 42: Cage3.10, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-114.31, -200.2) to (-111.81, -197.7). Piece 43: Cage1.12, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-115.37, -76.74) to (-112.87, -74.24). Piece 44: Cage1.11, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-115.4, -69.55) to (-112.9, -67.05). Piece 45: IC6.34, on TOP_LAYER, over (-116.04, -13.38) to (-115.34, -13.13). Piece 46: IC6.31, on TOP_LAYER, over (-116.04, -14.88) to (-115.34, -14.63). Piece 47: IC6.27, on TOP_LAYER, over (-116.04, -16.88) to (-115.34, -16.63). Piece 48: IC7.27, on TOP_LAYER, over (-117.04, 19.13) to (-116.34, 19.38). Piece 49: IC7.31, on TOP_LAYER, over (-117.04, 21.13) to (-116.34, 21.38). Piece 50: IC7.34, on TOP_LAYER, over (-117.04, 22.63) to (-116.34, 22.88). Piece 51: IC6.38, on TOP_LAYER, over (-117.02, -11.9) to (-116.77, -11.2). Piece 52: IC6.23, on TOP_LAYER, over (-117.02, -18.8) to (-116.77, -18.1). Piece 53: J3.38, on TOP_LAYER, over (-117.88, -65.98) to (-116.08, -65.63). Piece 54: J3.35, on TOP_LAYER, over (-117.88, -68.38) to (-116.08, -68.03). Piece 55: J3.32, on TOP_LAYER, over (-117.88, -70.78) to (-116.08, -70.43). Piece 56: J3.26, on TOP_LAYER, over (-117.88, -75.58) to (-116.08, -75.23). Piece 57: J3.23, on TOP_LAYER, over (-117.88, -77.98) to (-116.08, -77.63). Piece 58: J3.20, on TOP_LAYER, over (-117.88, -80.38) to (-116.08, -80.03). Piece 59: Cage1.17, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-118.32, -83.95) to (-115.82, -81.45). Piece 60: IC7.23, on TOP_LAYER, over (-118.02, 17.2) to (-117.77, 17.9). Piece 61: IC7.38, on TOP_LAYER, over (-118.02, 24.1) to (-117.77, 24.8). Piece 62: R54.1, on TOP_LAYER, over (-119.43, -138.74) to (-118.43, -137.84). Piece 63: IC6.49, on TOP_LAYER and BOTTOM_LAYER, 16 drill(s), over (-121.24, -17.1) to (-117.04, -12.9). Piece 64: Cage3.16, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-120.51, -181.2) to (-118.01, -178.7). Piece 65: IC6.18, on TOP_LAYER, over (-119.52, -18.8) to (-119.27, -18.1). Piece 66: IC6.43, on TOP_LAYER, over (-119.52, -11.9) to (-119.27, -11.2). Piece 67: J3.1, on TOP_LAYER, over (-120.39, -66.38) to (-118.59, -66.03). Piece 68: J3.4, on TOP_LAYER, over (-120.39, -68.78) to (-118.59, -68.43). Piece 69: J3.7, on TOP_LAYER, over (-120.39, -71.18) to (-118.59, -70.83). Piece 70: J3.13, on TOP_LAYER, over (-120.39, -75.98) to (-118.59, -75.63). Piece 71: J3.16, on TOP_LAYER, over (-120.39, -78.38) to (-118.59, -78.03). Piece 72: J3.19, on TOP_LAYER, over (-120.39, -80.78) to (-118.59, -80.43). Piece 73: IC7.49, on TOP_LAYER and BOTTOM_LAYER, 16 drill(s), over (-122.24, 18.9) to (-118.04, 23.1). Piece 74: IC7.18, on TOP_LAYER, over (-120.52, 17.2) to (-120.27, 17.9). Piece 75: IC7.43, on TOP_LAYER, over (-120.52, 24.1) to (-120.27, 24.8). Piece 76: J13.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-121.8, -50.68) to (-120.2, -49.08). Piece 77: Cage1.10, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-122.82, -64.95) to (-120.32, -62.45). Piece 78: IC6.6, on TOP_LAYER, over (-122.94, -14.88) to (-122.24, -14.63). Piece 79: IC6.7, on TOP_LAYER, over (-122.94, -15.38) to (-122.24, -15.13). Piece 80: C56.1, on TOP_LAYER, over (-123.22, -101.9) to (-122.07, -100.1). Piece 81: IC7.7, on TOP_LAYER, over (-123.94, 20.63) to (-123.24, 20.88). Piece 82: IC7.6, on TOP_LAYER, over (-123.94, 21.13) to (-123.24, 21.38). Piece 83: Cage3.9, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-125.01, -200.2) to (-122.51, -197.7). Piece 84: Cage1.16, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-129.02, -83.95) to (-126.52, -81.45). Piece 85: Cage3.15, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-129.51, -181.2) to (-127.01, -178.7). Piece 86: J14.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-132.48, -14.34) to (-130.88, -12.74). Piece 87: J20.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-132.48, 3.66) to (-130.88, 5.26). Piece 88: J19.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-132.48, 12.66) to (-130.88, 14.26). Piece 89: J18.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-132.48, 21.66) to (-130.88, 23.26). Piece 90: J17.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-132.48, 30.66) to (-130.88, 32.26). Piece 91: Cage1.9, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-133.52, -64.95) to (-131.02, -62.45). Piece 92: Cage3.8, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-134.01, -200.2) to (-131.51, -197.7). Piece 93: J15.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-134.14, -34.38) to (-132.54, -32.78). Piece 94: Cage1.15, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.02, -83.95) to (-135.52, -81.45). Piece 95: Cage3.14, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-138.51, -181.2) to (-136.01, -178.7). Piece 96: J7.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, -9.56) to (-138.58, -7.36). Piece 97: J6.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, -18.56) to (-138.58, -16.36). Piece 98: J8.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, -0.56) to (-138.58, 1.64). Piece 99: J9.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, 8.44) to (-138.58, 10.64). Piece 100: J10.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, 17.44) to (-138.58, 19.64). Piece 101: J11.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, 26.44) to (-138.58, 28.64). Piece 102: J12.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-140.78, 35.44) to (-138.58, 37.64). Piece 103: Cage1.8, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-142.52, -64.95) to (-140.02, -62.45). Piece 104: Cage3.7, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-143.01, -200.2) to (-140.51, -197.7). Piece 105: Cage1.14, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-147.02, -83.95) to (-144.52, -81.45). Piece 106: Cage3.13, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-147.51, -181.2) to (-145.01, -178.7). Piece 107: Cage1.7, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-151.52, -64.95) to (-149.02, -62.45). Piece 108: Cage3.6, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-152.01, -200.2) to (-149.51, -197.7). Piece 109: Cage1.13, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-156.02, -83.95) to (-153.52, -81.45). Piece 110: Cage1.6, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-160.52, -64.95) to (-158.02, -62.45). Piece 111: J16.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-168.78, -33.67) to (-167.18, -32.07). Piece 112: J4.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-184.64, -14.56) to (-182.44, -12.36). Piece 113: C186B.2, on TOP_LAYER, over (30.24, -62.3) to (30.86, -61.68). Piece 114: C186C.2, on TOP_LAYER, over (30.24, -76.56) to (30.86, -75.94). Piece 115: C186A.2, on TOP_LAYER, over (30.24, -90.67) to (30.86, -90.05). Piece 116: C186D.2, on TOP_LAYER, over (30.37, -105.02) to (30.99, -104.4). Piece 117: T1B.2, on TOP_LAYER, over (44.39, -67.6) to (45.44, -66.95). Piece 118: T1C.2, on TOP_LAYER, over (44.39, -81.86) to (45.44, -81.21). Piece 119: T1A.2, on TOP_LAYER, over (44.39, -95.97) to (45.44, -95.32). Piece 120: T1D.2, on TOP_LAYER, over (44.52, -110.32) to (45.57, -109.67). Piece 121: J5C.1, on TOP_LAYER, over (44.33, -219.31) to (46.33, -218.81). Piece 122: J5C.10, on TOP_LAYER, over (44.33, -226.51) to (46.33, -226.01). Piece 123: R12B.1, on TOP_LAYER, over (45.01, -62.24) to (45.91, -61.24). Piece 124: R12C.1, on TOP_LAYER, over (45.01, -76.5) to (45.91, -75.5). Piece 125: R12A.1, on TOP_LAYER, over (45.01, -90.61) to (45.91, -89.61). Piece 126: R12D.1, on TOP_LAYER, over (45.14, -104.96) to (46.04, -103.96). Piece 127: C13B.2, on TOP_LAYER, over (45.63, -60.1) to (46.68, -58.7). Piece 128: C13C.2, on TOP_LAYER, over (45.63, -74.35) to (46.68, -72.95). Piece 129: C13A.2, on TOP_LAYER, over (45.63, -88.47) to (46.68, -87.07). Piece 130: C13D.2, on TOP_LAYER, over (45.75, -102.82) to (46.8, -101.42). Piece 131: R10B.1, on TOP_LAYER, over (46.67, -65.67) to (47.57, -64.67). Piece 132: R10C.1, on TOP_LAYER, over (46.67, -79.93) to (47.57, -78.93). Piece 133: R10A.1, on TOP_LAYER, over (46.67, -94.04) to (47.57, -93.04). Piece 134: R10D.1, on TOP_LAYER, over (46.79, -108.39) to (47.69, -107.39). Piece 135: C214B.2, on TOP_LAYER, over (48.97, -62.48) to (49.59, -61.86). Piece 136: C214C.2, on TOP_LAYER, over (48.97, -76.74) to (49.59, -76.12). Piece 137: C214A.2, on TOP_LAYER, over (48.97, -90.85) to (49.59, -90.23). Piece 138: T2B.2, on TOP_LAYER, over (48.85, -67.6) to (49.9, -66.95). Piece 139: T2C.2, on TOP_LAYER, over (48.85, -81.86) to (49.9, -81.21). Piece 140: T2A.2, on TOP_LAYER, over (48.85, -95.97) to (49.9, -95.32). Piece 141: C214D.2, on TOP_LAYER, over (49.1, -105.2) to (49.72, -104.58). Piece 142: T2D.2, on TOP_LAYER, over (48.98, -110.32) to (50.03, -109.67). Piece 143: C219B.2, on TOP_LAYER, over (49.58, -60.1) to (50.63, -58.7). Piece 144: C219C.2, on TOP_LAYER, over (49.58, -74.35) to (50.63, -72.95). Piece 145: C219A.2, on TOP_LAYER, over (49.58, -88.47) to (50.63, -87.07). Piece 146: C219D.2, on TOP_LAYER, over (49.71, -102.82) to (50.76, -101.42). Piece 147: IC1.55, on TOP_LAYER, over (253.88, 11.49) to (254.13, 12.51). Piece 148: IC1.31, on TOP_LAYER, over (257.49, 0.38) to (258.51, 0.63). Piece 149: IC1.41, on TOP_LAYER, over (257.49, 5.38) to (258.51, 5.63). Piece 150: C38.2, on TOP_LAYER, over (267.29, -25.92) to (267.69, -25.47). Piece 151: W2.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (276.11, -56.79) to (277.71, -55.19). Piece 152: C37.1, on TOP_LAYER, over (298.94, -26.62) to (299.34, -26.17). Piece 153: W1.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (300.22, -56.79) to (301.82, -55.19). Piece 154: C31.2, on TOP_LAYER, over (313.67, -25.92) to (314.07, -25.47). Piece 155: C32.2, on TOP_LAYER, over (319, -25.92) to (319.4, -25.47). Piece 156: C33.2, on TOP_LAYER, over (324.84, -25.92) to (325.24, -25.47). Piece 157: C228B.2, on TOP_LAYER, over (51.38, -62.48) to (52, -61.86). Piece 158: C228C.2, on TOP_LAYER, over (51.38, -76.74) to (52, -76.12). Piece 159: C228A.2, on TOP_LAYER, over (51.38, -90.85) to (52, -90.23). Piece 160: C228D.2, on TOP_LAYER, over (51.51, -105.2) to (52.13, -104.58). Piece 161: J5C.20, on TOP_LAYER, over (52.53, -218.91) to (54.53, -218.41). Piece 162: J5C.17, on TOP_LAYER, over (52.53, -221.31) to (54.53, -220.81). Piece 163: J5C.14, on TOP_LAYER, over (52.53, -223.71) to (54.53, -223.21). Piece 164: J5C.11, on TOP_LAYER, over (52.53, -226.11) to (54.53, -225.61). Piece 165: IC20B.2, on TOP_LAYER, over (53.58, -68.58) to (54.68, -67.98). Piece 166: IC20C.2, on TOP_LAYER, over (53.58, -82.84) to (54.68, -82.24). Piece 167: IC20A.2, on TOP_LAYER, over (53.58, -96.95) to (54.68, -96.35). Piece 168: IC20D.2, on TOP_LAYER, over (53.71, -111.3) to (54.81, -110.7). Piece 169: J1B.125, on TOP_LAYER, over (54.79, -2.45) to (55.94, -2.05). Piece 170: J1B.122, on TOP_LAYER, over (54.79, -4.7) to (55.94, -4.3). Piece 171: J1B.119, on TOP_LAYER, over (54.79, -6.95) to (55.94, -6.55). Piece 172: J1B.116, on TOP_LAYER, over (54.79, -9.2) to (55.94, -8.8). Piece 173: J1B.113, on TOP_LAYER, over (54.79, -11.45) to (55.94, -11.05). Piece 174: J1B.110, on TOP_LAYER, over (54.79, -13.7) to (55.94, -13.3). Piece 175: J1B.107, on TOP_LAYER, over (54.79, -15.95) to (55.94, -15.55). Piece 176: J1B.104, on TOP_LAYER, over (54.79, -18.2) to (55.94, -17.8). Piece 177: J1B.101, on TOP_LAYER, over (54.79, -20.45) to (55.94, -20.05). Piece 178: J1B.98, on TOP_LAYER, over (54.79, -22.7) to (55.94, -22.3). Piece 179: J1B.95, on TOP_LAYER, over (54.79, -24.95) to (55.94, -24.55). Piece 180: J1B.92, on TOP_LAYER, over (54.79, -27.2) to (55.94, -26.8). Piece 181: J1B.89, on TOP_LAYER, over (54.79, -29.45) to (55.94, -29.05). Piece 182: J1B.86, on TOP_LAYER, over (54.79, -31.7) to (55.94, -31.3). Piece 183: J1B.128, on TOP_LAYER, over (54.79, -0.2) to (55.94, 0.2). Piece 184: J1B.131, on TOP_LAYER, over (54.79, 2.05) to (55.94, 2.45). Piece 185: J1B.134, on TOP_LAYER, over (54.79, 4.3) to (55.94, 4.7). Piece 186: J1B.137, on TOP_LAYER, over (54.79, 6.55) to (55.94, 6.95). Piece 187: J1B.140, on TOP_LAYER, over (54.79, 8.8) to (55.94, 9.2). Piece 188: J1B.143, on TOP_LAYER, over (54.79, 11.05) to (55.94, 11.45). Piece 189: J1B.146, on TOP_LAYER, over (54.79, 13.3) to (55.94, 13.7). Piece 190: J1B.149, on TOP_LAYER, over (54.79, 15.55) to (55.94, 15.95). Piece 191: J1B.152, on TOP_LAYER, over (54.79, 17.8) to (55.94, 18.2). Piece 192: J1B.155, on TOP_LAYER, over (54.79, 20.05) to (55.94, 20.45). Piece 193: J1B.158, on TOP_LAYER, over (54.79, 22.3) to (55.94, 22.7). Piece 194: J1B.161, on TOP_LAYER, over (54.79, 24.55) to (55.94, 24.95). Piece 195: J1B.164, on TOP_LAYER, over (54.79, 26.8) to (55.94, 27.2). Piece 196: J1B.170, on TOP_LAYER, over (54.79, 31.3) to (55.94, 31.7). Piece 197: C30.1, on TOP_LAYER, over (60, -55.27) to (60.4, -54.82). Piece 198: J1B.46, on TOP_LAYER, over (59.79, -2.45) to (60.94, -2.05). Piece 199: J1B.49, on TOP_LAYER, over (59.79, -4.7) to (60.94, -4.3). Piece 200: J1B.52, on TOP_LAYER, over (59.79, -6.95) to (60.94, -6.55). Piece 201: J1B.55, on TOP_LAYER, over (59.79, -9.2) to (60.94, -8.8). Piece 202: J1B.58, on TOP_LAYER, over (59.79, -11.45) to (60.94, -11.05). Piece 203: J1B.61, on TOP_LAYER, over (59.79, -13.7) to (60.94, -13.3). Piece 204: J1B.64, on TOP_LAYER, over (59.79, -15.95) to (60.94, -15.55). Piece 205: J1B.67, on TOP_LAYER, over (59.79, -18.2) to (60.94, -17.8). Piece 206: J1B.70, on TOP_LAYER, over (59.79, -20.45) to (60.94, -20.05). Piece 207: J1B.73, on TOP_LAYER, over (59.79, -22.7) to (60.94, -22.3). Piece 208: J1B.76, on TOP_LAYER, over (59.79, -24.95) to (60.94, -24.55). Piece 209: J1B.79, on TOP_LAYER, over (59.79, -27.2) to (60.94, -26.8). Piece 210: J1B.82, on TOP_LAYER, over (59.79, -29.45) to (60.94, -29.05). Piece 211: J1B.85, on TOP_LAYER, over (59.79, -31.7) to (60.94, -31.3). Piece 212: J1B.43, on TOP_LAYER, over (59.79, -0.2) to (60.94, 0.2). Piece 213: J1B.40, on TOP_LAYER, over (59.79, 2.05) to (60.94, 2.45). Piece 214: J1B.37, on TOP_LAYER, over (59.79, 4.3) to (60.94, 4.7). Piece 215: J1B.34, on TOP_LAYER, over (59.79, 6.55) to (60.94, 6.95). Piece 216: J1B.31, on TOP_LAYER, over (59.79, 8.8) to (60.94, 9.2). Piece 217: J1B.28, on TOP_LAYER, over (59.79, 11.05) to (60.94, 11.45). Piece 218: J1B.26, on TOP_LAYER, over (59.79, 12.55) to (60.94, 12.95). Piece 219: J1B.25, on TOP_LAYER, over (59.79, 13.3) to (60.94, 13.7). Piece 220: J1B.22, on TOP_LAYER, over (59.79, 15.55) to (60.94, 15.95). Piece 221: J1B.19, on TOP_LAYER, over (59.79, 17.8) to (60.94, 18.2). Piece 222: J1B.17, on TOP_LAYER, over (59.79, 19.3) to (60.94, 19.7). Piece 223: J1B.16, on TOP_LAYER, over (59.79, 20.05) to (60.94, 20.45). Piece 224: J1B.13, on TOP_LAYER, over (59.79, 22.3) to (60.94, 22.7). Piece 225: J1B.10, on TOP_LAYER, over (59.79, 24.55) to (60.94, 24.95). Piece 226: J1B.7, on TOP_LAYER, over (59.79, 26.8) to (60.94, 27.2). Piece 227: J1B.1, on TOP_LAYER, over (59.79, 31.3) to (60.94, 31.7). Piece 228: J1A.125, on TOP_LAYER, over (85.27, -2.45) to (86.42, -2.05). Piece 229: J1A.122, on TOP_LAYER, over (85.27, -4.7) to (86.42, -4.3). Piece 230: J1A.119, on TOP_LAYER, over (85.27, -6.95) to (86.42, -6.55). Piece 231: J1A.116, on TOP_LAYER, over (85.27, -9.2) to (86.42, -8.8). Piece 232: J1A.113, on TOP_LAYER, over (85.27, -11.45) to (86.42, -11.05). Piece 233: J1A.110, on TOP_LAYER, over (85.27, -13.7) to (86.42, -13.3). Piece 234: J1A.107, on TOP_LAYER, over (85.27, -15.95) to (86.42, -15.55). Piece 235: J1A.104, on TOP_LAYER, over (85.27, -18.2) to (86.42, -17.8). Piece 236: J1A.101, on TOP_LAYER, over (85.27, -20.45) to (86.42, -20.05). Piece 237: J1A.98, on TOP_LAYER, over (85.27, -22.7) to (86.42, -22.3). Piece 238: J1A.95, on TOP_LAYER, over (85.27, -24.95) to (86.42, -24.55). Piece 239: J1A.92, on TOP_LAYER, over (85.27, -27.2) to (86.42, -26.8). Piece 240: J1A.89, on TOP_LAYER, over (85.27, -29.45) to (86.42, -29.05). Piece 241: J1A.86, on TOP_LAYER, over (85.27, -31.7) to (86.42, -31.3). Piece 242: J1A.128, on TOP_LAYER, over (85.27, -0.2) to (86.42, 0.2). Piece 243: J1A.131, on TOP_LAYER, over (85.27, 2.05) to (86.42, 2.45). Piece 244: J1A.134, on TOP_LAYER, over (85.27, 4.3) to (86.42, 4.7). Piece 245: J1A.137, on TOP_LAYER, over (85.27, 6.55) to (86.42, 6.95). Piece 246: J1A.140, on TOP_LAYER, over (85.27, 8.8) to (86.42, 9.2). Piece 247: J1A.143, on TOP_LAYER, over (85.27, 11.05) to (86.42, 11.45). Piece 248: J1A.146, on TOP_LAYER, over (85.27, 13.3) to (86.42, 13.7). Piece 249: J1A.149, on TOP_LAYER, over (85.27, 15.55) to (86.42, 15.95). Piece 250: J1A.152, on TOP_LAYER, over (85.27, 17.8) to (86.42, 18.2). Piece 251: J1A.155, on TOP_LAYER, over (85.27, 20.05) to (86.42, 20.45). Piece 252: J1A.158, on TOP_LAYER, over (85.27, 22.3) to (86.42, 22.7). Piece 253: J1A.161, on TOP_LAYER, over (85.27, 24.55) to (86.42, 24.95). Piece 254: J1A.164, on TOP_LAYER, over (85.27, 26.8) to (86.42, 27.2). Piece 255: J1A.170, on TOP_LAYER, over (85.27, 31.3) to (86.42, 31.7). Piece 256: J1A.46, on TOP_LAYER, over (90.27, -2.45) to (91.42, -2.05). Piece 257: J1A.49, on TOP_LAYER, over (90.27, -4.7) to (91.42, -4.3). Piece 258: J1A.52, on TOP_LAYER, over (90.27, -6.95) to (91.42, -6.55). Piece 259: J1A.55, on TOP_LAYER, over (90.27, -9.2) to (91.42, -8.8). Piece 260: J1A.58, on TOP_LAYER, over (90.27, -11.45) to (91.42, -11.05). Piece 261: J1A.61, on TOP_LAYER, over (90.27, -13.7) to (91.42, -13.3). Piece 262: J1A.64, on TOP_LAYER, over (90.27, -15.95) to (91.42, -15.55). Piece 263: J1A.67, on TOP_LAYER, over (90.27, -18.2) to (91.42, -17.8). Piece 264: J1A.70, on TOP_LAYER, over (90.27, -20.45) to (91.42, -20.05). Piece 265: J1A.73, on TOP_LAYER, over (90.27, -22.7) to (91.42, -22.3). Piece 266: J1A.76, on TOP_LAYER, over (90.27, -24.95) to (91.42, -24.55). Piece 267: J1A.79, on TOP_LAYER, over (90.27, -27.2) to (91.42, -26.8). Piece 268: J1A.82, on TOP_LAYER, over (90.27, -29.45) to (91.42, -29.05). Piece 269: J1A.85, on TOP_LAYER, over (90.27, -31.7) to (91.42, -31.3). Piece 270: J1A.43, on TOP_LAYER, over (90.27, -0.2) to (91.42, 0.2). Piece 271: J1A.40, on TOP_LAYER, over (90.27, 2.05) to (91.42, 2.45). Piece 272: J1A.37, on TOP_LAYER, over (90.27, 4.3) to (91.42, 4.7). Piece 273: J1A.34, on TOP_LAYER, over (90.27, 6.55) to (91.42, 6.95). Piece 274: J1A.31, on TOP_LAYER, over (90.27, 8.8) to (91.42, 9.2). Piece 275: J1A.28, on TOP_LAYER, over (90.27, 11.05) to (91.42, 11.45). Piece 276: J1A.26, on TOP_LAYER, over (90.27, 12.55) to (91.42, 12.95). Piece 277: J1A.25, on TOP_LAYER, over (90.27, 13.3) to (91.42, 13.7). Piece 278: J1A.22, on TOP_LAYER, over (90.27, 15.55) to (91.42, 15.95). Piece 279: J1A.19, on TOP_LAYER, over (90.27, 17.8) to (91.42, 18.2). Piece 280: J1A.16, on TOP_LAYER, over (90.27, 20.05) to (91.42, 20.45). Piece 281: J1A.13, on TOP_LAYER, over (90.27, 22.3) to (91.42, 22.7). Piece 282: J1A.10, on TOP_LAYER, over (90.27, 24.55) to (91.42, 24.95). Piece 283: J1A.7, on TOP_LAYER, over (90.27, 26.8) to (91.42, 27.2). Piece 284: J1A.5, on TOP_LAYER, over (90.27, 28.3) to (91.42, 28.7). Piece 285: J1A.1, on TOP_LAYER, over (90.27, 31.3) to (91.42, 31.7). Piece 286: W8.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (101.23, -56.79) to (102.83, -55.19). Piece 287: C51.2, on TOP_LAYER, over (120.45, -25.92) to (120.85, -25.47). Piece 288: C50.2, on TOP_LAYER, over (131.14, -25.92) to (131.54, -25.47). Piece 289: W7.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (134.18, -56.79) to (135.78, -55.19). Piece 290: C44.2, on TOP_LAYER, over (136.99, -25.92) to (137.39, -25.47). Piece 291: C45.2, on TOP_LAYER, over (142.83, -25.92) to (143.23, -25.47). Piece 292: C46.2, on TOP_LAYER, over (148.67, -25.92) to (149.07, -25.47). Piece 293: C47.2, on TOP_LAYER, over (154.51, -25.92) to (154.91, -25.47). Piece 294: C48.2, on TOP_LAYER, over (160.38, -25.92) to (160.78, -25.47). Piece 295: C49.2, on TOP_LAYER, over (166.22, -25.92) to (166.62, -25.47). Piece 296: W6.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (167.15, -56.79) to (168.75, -55.19). Piece 297: C43.2, on TOP_LAYER, over (172.06, -25.92) to (172.46, -25.47). Piece 298: C34.2, on TOP_LAYER, over (173.21, -82.28) to (173.61, -81.83). Piece 299: JP1.2, on TOP_LAYER, over (178.51, -18.06) to (179.53, -14.91). Piece 300: C35.2, on TOP_LAYER, over (179.05, -82.28) to (179.45, -81.83). Piece 301: SW1.1, on TOP_LAYER, over (183.22, 26.59) to (184.92, 30.29). Piece 302: JP2.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (184.62, 23.31) to (185.42, 24.11). Piece 303: C36.2, on TOP_LAYER, over (184.92, -82.28) to (185.32, -81.83). Piece 304: C42.2, on TOP_LAYER, over (187.74, -25.92) to (188.14, -25.47). Piece 305: IC2.1, on TOP_LAYER, over (187.57, 11.98) to (188.48, 12.9). Piece 306: JP1.10, on TOP_LAYER, over (188.67, -18.06) to (189.69, -14.91). Piece 307: C11.1, on TOP_LAYER, over (189.45, -24.76) to (189.9, -24.36). Piece 308: JP2.10, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (189.7, 23.31) to (190.5, 24.11). Piece 309: R18.2, on TOP_LAYER, over (190.2, 7.13) to (190.78, 7.75). Piece 310: W5.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (191.22, -56.79) to (192.82, -55.19). Piece 311: IC3.7, on TOP_LAYER, over (197.71, 9.18) to (199.21, 9.63). Piece 312: C12.1, on TOP_LAYER, over (198.48, -3.47) to (198.93, -3.07). Piece 313: IC3.1, on TOP_LAYER, over (203.51, 8.53) to (205.01, 8.98). Piece 314: IC3.2, on TOP_LAYER, over (203.51, 9.18) to (205.01, 9.63). Piece 315: IC3.3, on TOP_LAYER, over (203.51, 9.83) to (205.01, 10.28). Piece 316: IC3.4, on TOP_LAYER, over (203.51, 10.48) to (205.01, 10.93). Piece 317: C10.1, on TOP_LAYER, over (209.19, 48.1) to (209.64, 48.5). Piece 318: C1.2, on TOP_LAYER, over (209.45, -32.46) to (210.07, -31.84). Piece 319: C2.2, on TOP_LAYER, over (209.45, -36.46) to (210.07, -35.84). Piece 320: C9.1, on TOP_LAYER, over (209.56, 52.43) to (209.96, 52.88). Piece 321: C8.1, on TOP_LAYER, over (209.56, 57.43) to (209.96, 57.88). Piece 322: C7.1, on TOP_LAYER, over (209.56, 61.43) to (209.96, 61.88). Piece 323: C6.1, on TOP_LAYER, over (209.56, 65.43) to (209.96, 65.88). Piece 324: C5.1, on TOP_LAYER, over (209.56, 70.43) to (209.96, 70.88). Piece 325: C4.1, on TOP_LAYER, over (209.56, 74.43) to (209.96, 74.88). Piece 326: C3.1, on TOP_LAYER, over (209.56, 78.43) to (209.96, 78.88). Piece 327: C41.2, on TOP_LAYER, over (210.52, -25.92) to (210.92, -25.47). Piece 328: W4.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (214.82, -56.79) to (216.42, -55.19). Piece 329: C40.2, on TOP_LAYER, over (230.18, -25.92) to (230.58, -25.47). Piece 330: W3.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (238.9, -56.79) to (240.5, -55.19). Piece 331: IC1.97, on TOP_LAYER, over (241.49, -0.63) to (242.51, -0.38). Piece 332: IC1.83, on TOP_LAYER, over (241.49, 6.38) to (242.51, 6.63). Piece 333: IC5.1, on TOP_LAYER, over (242.64, -55.3) to (244.64, -54.7). Piece 334: IC5.2, on TOP_LAYER, over (242.64, -56.57) to (244.64, -55.97). Piece 335: IC5.3, on TOP_LAYER, over (242.64, -57.84) to (244.64, -57.24). Piece 336: IC5.8, on TOP_LAYER, over (242.64, -64.19) to (244.64, -63.59). Piece 337: IC1.72, on TOP_LAYER, over (245.38, 11.49) to (245.63, 12.51). Piece 338: IC1.11, on TOP_LAYER, over (248.88, -4.51) to (249.13, -3.49). Piece 339: IC1.15, on TOP_LAYER, over (250.88, -4.51) to (251.13, -3.49). Piece 340: C39.2, on TOP_LAYER, over (252.96, -25.92) to (253.36, -25.47). Piece 341: C17.2, on BOTTOM_LAYER, over (-83.05, -37.19) to (-80.7, -34.94). Piece 342: C21.2, on BOTTOM_LAYER, over (-84.27, -51.16) to (-81.92, -48.91). Piece 343: C19.2, on BOTTOM_LAYER, over (-84.38, -47.38) to (-82.03, -45.13). Piece 344: C14.2, on BOTTOM_LAYER, over (-84.43, -43.59) to (-82.08, -41.34). Piece 345: J2.23, on BOTTOM_LAYER, over (-109.37, -185.03) to (-107.57, -184.68). Piece 346: J2.38, on BOTTOM_LAYER, over (-109.37, -197.03) to (-107.57, -196.68). Piece 347: J2.20, on BOTTOM_LAYER, over (-109.37, -182.63) to (-107.57, -182.28). Piece 348: J2.26, on BOTTOM_LAYER, over (-109.37, -187.43) to (-107.57, -187.08). Piece 349: J2.32, on BOTTOM_LAYER, over (-109.37, -192.23) to (-107.57, -191.88). Piece 350: J2.35, on BOTTOM_LAYER, over (-109.37, -194.63) to (-107.57, -194.28). Piece 351: J2.16, on BOTTOM_LAYER, over (-111.88, -184.63) to (-110.08, -184.28). Piece 352: J2.19, on BOTTOM_LAYER, over (-111.88, -182.23) to (-110.08, -181.88). Piece 353: J2.13, on BOTTOM_LAYER, over (-111.88, -187.03) to (-110.08, -186.68). Piece 354: J2.7, on BOTTOM_LAYER, over (-111.88, -191.83) to (-110.08, -191.48). Piece 355: J2.4, on BOTTOM_LAYER, over (-111.88, -194.23) to (-110.08, -193.88). Piece 356: J2.1, on BOTTOM_LAYER, over (-111.88, -196.63) to (-110.08, -196.28). Piece 357: J5A.10, on BOTTOM_LAYER, over (74.2, -167.8) to (76.2, -167.3). Piece 358: J5A.1, on BOTTOM_LAYER, over (74.2, -175) to (76.2, -174.5). Piece 359: J5B.10, on BOTTOM_LAYER, over (74.2, -184.55) to (76.2, -184.05). Piece 360: J5B.1, on BOTTOM_LAYER, over (74.2, -191.75) to (76.2, -191.25). Piece 361: J5A.11, on BOTTOM_LAYER, over (82.4, -168.2) to (84.4, -167.7). Piece 362: J5A.14, on BOTTOM_LAYER, over (82.4, -170.6) to (84.4, -170.1). Piece 363: J5A.17, on BOTTOM_LAYER, over (82.4, -173) to (84.4, -172.5). Piece 364: J5A.20, on BOTTOM_LAYER, over (82.4, -175.4) to (84.4, -174.9). Piece 365: J5B.11, on BOTTOM_LAYER, over (82.4, -184.95) to (84.4, -184.45). Piece 366: J5B.17, on BOTTOM_LAYER, over (82.4, -189.75) to (84.4, -189.25). Piece 367: J5B.14, on BOTTOM_LAYER, over (82.4, -187.35) to (84.4, -186.85). Piece 368: J5B.20, on BOTTOM_LAYER, over (82.4, -192.15) to (84.4, -191.65). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC11_2NetC11_2's copper is in 4 pieces: FB1.1 and 2 other piece(s) are not connected to the rest of the net
NetC11_2's copper is in 4 pieces: FB1.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: C11.2, on TOP_LAYER, over (190.15, -24.76) to (190.6, -24.36). Piece 2: FB1.1, on TOP_LAYER, over (208.04, 83.63) to (209.49, 84.78). Piece 3: IC1.10, on TOP_LAYER, over (248.38, -4.51) to (248.63, -3.49). Piece 4: IC1.12, on TOP_LAYER, over (249.38, -4.51) to (249.63, -3.49). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC14_1NetC14_1's copper is in 4 pieces: C15.2 and 2 other piece(s) are not connected to the rest of the net
NetC14_1's copper is in 4 pieces: C15.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L2.1, on TOP_LAYER, 3.1 mm2 of pour, over (-152.85, -50.23) to (-150.75, -48.23). Piece 2: C15.2, on TOP_LAYER, over (-85.07, -27.12) to (-84.45, -26.5). Piece 3: C14.1, on BOTTOM_LAYER, over (-89.33, -43.59) to (-86.98, -41.34). Piece 4: J2.29, on BOTTOM_LAYER, over (-109.37, -189.83) to (-107.57, -189.48). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC16_2NetC16_2's copper is in 5 pieces: L1.1 and 3 other piece(s) are not connected to the rest of the net
NetC16_2's copper is in 5 pieces: L1.1 and 3 other piece(s) are not connected to the rest of the net. Piece 1: L3.2, on TOP_LAYER, 3.1 mm2 of pour, over (-80.33, -13.06) to (-78.23, -11.06). Piece 2: L1.1, on TOP_LAYER, 3.1 mm2 of pour, over (-86.84, -25.18) to (-84.74, -23.18). Piece 3: L2.2, on TOP_LAYER, 3.1 mm2 of pour, over (-149.45, -50.23) to (-147.35, -48.23). Piece 4: C16.2, on TOP_LAYER, over (-83.51, -27.12) to (-82.89, -26.5). Piece 5: C17.1, on BOTTOM_LAYER, over (-87.95, -37.19) to (-85.6, -34.94). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC18_2NetC18_2's copper is in 4 pieces: C18.2 and 2 other piece(s) are not connected to the rest of the net
NetC18_2's copper is in 4 pieces: C18.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L1.2, on TOP_LAYER, 3.1 mm2 of pour, over (-83.44, -25.18) to (-81.34, -23.18). Piece 2: C18.2, on TOP_LAYER, over (-86.62, -27.12) to (-86, -26.5). Piece 3: C19.1, on BOTTOM_LAYER, over (-89.28, -47.38) to (-86.93, -45.13). Piece 4: J2.10, on BOTTOM_LAYER, over (-111.88, -189.43) to (-110.08, -189.08). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC1_1NetC1_1's copper is in 3 pieces: X1.1 and 1 other piece(s) are not connected to the rest of the net
NetC1_1's copper is in 3 pieces: X1.1 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC1.22, on TOP_LAYER, over (254.38, -4.51) to (254.63, -3.49). Piece 2: X1.1, on TOP_LAYER, over (203.71, -28.9) to (205.41, -26.5). Piece 3: C1.1, on TOP_LAYER, over (209.45, -31.56) to (210.07, -30.94). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC20_2NetC20_2's copper is in 4 pieces: C20.2 and 2 other piece(s) are not connected to the rest of the net
NetC20_2's copper is in 4 pieces: C20.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L3.1, on TOP_LAYER, 3.1 mm2 of pour, over (-83.73, -13.06) to (-81.63, -11.06). Piece 2: C20.2, on TOP_LAYER, over (-92.63, -29.53) to (-92.01, -28.91). Piece 3: C21.1, on BOTTOM_LAYER, over (-89.17, -51.16) to (-86.82, -48.91). Piece 4: J2.30, on BOTTOM_LAYER, over (-109.37, -190.63) to (-107.57, -190.28). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC214A_1NetC214A_1's copper is in 4 pieces: L5A.2 and 2 other piece(s) are not connected to the rest of the net
NetC214A_1's copper is in 4 pieces: L5A.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: C220A.1, on TOP_LAYER, over (-17.44, -94.94) to (-16.39, -93.54). Piece 2: L5A.2, on TOP_LAYER, over (31.72, -94.92) to (32.87, -93.47). Piece 3: C214A.1, on TOP_LAYER, over (49.87, -90.85) to (50.49, -90.23). Piece 4: J5A.16, on BOTTOM_LAYER, over (82.4, -172.2) to (84.4, -171.7). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC214B_1NetC214B_1's copper is in 4 pieces: L5B.2 and 2 other piece(s) are not connected to the rest of the net
NetC214B_1's copper is in 4 pieces: L5B.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: C220B.1, on TOP_LAYER, over (-17.44, -66.58) to (-16.39, -65.18). Piece 2: L5B.2, on TOP_LAYER, over (31.72, -66.55) to (32.87, -65.1). Piece 3: C214B.1, on TOP_LAYER, over (49.87, -62.48) to (50.49, -61.86). Piece 4: J5B.16, on BOTTOM_LAYER, over (82.4, -188.95) to (84.4, -188.45). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC214C_1NetC214C_1's copper is in 4 pieces: L5C.2 and 2 other piece(s) are not connected to the rest of the net
NetC214C_1's copper is in 4 pieces: L5C.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: C220C.1, on TOP_LAYER, over (-17.44, -80.83) to (-16.39, -79.43). Piece 2: L5C.2, on TOP_LAYER, over (31.72, -80.81) to (32.87, -79.36). Piece 3: C214C.1, on TOP_LAYER, over (49.87, -76.74) to (50.49, -76.12). Piece 4: J5C.16, on TOP_LAYER, over (52.53, -222.11) to (54.53, -221.61). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC214D_1NetC214D_1's copper is in 4 pieces: C220D.1 and 2 other piece(s) are not connected to the rest of the net
NetC214D_1's copper is in 4 pieces: C220D.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: J5D.16, on TOP_LAYER, over (-8.33, -204) to (-6.33, -203.5). Piece 2: C220D.1, on TOP_LAYER, over (-17.31, -109.3) to (-16.26, -107.9). Piece 3: L5D.2, on TOP_LAYER, over (31.85, -109.27) to (33, -107.82). Piece 4: C214D.1, on TOP_LAYER, over (50, -105.2) to (50.62, -104.58). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC219A_1NetC219A_1's copper is in 4 pieces: C219A.1 and 2 other piece(s) are not connected to the rest of the net
NetC219A_1's copper is in 4 pieces: C219A.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L11A.2, on TOP_LAYER, over (35.78, -94.92) to (36.93, -93.47). Piece 2: C219A.1, on TOP_LAYER, over (51.38, -88.47) to (52.43, -87.07). Piece 3: C228A.1, on TOP_LAYER, over (52.28, -90.85) to (52.9, -90.23). Piece 4: J5A.15, on BOTTOM_LAYER, over (82.4, -171.4) to (84.4, -170.9). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC219B_1NetC219B_1's copper is in 4 pieces: C219B.1 and 2 other piece(s) are not connected to the rest of the net
NetC219B_1's copper is in 4 pieces: C219B.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L11B.2, on TOP_LAYER, over (-151.68, -47.13) to (-150.53, -45.68). Piece 2: C219B.1, on TOP_LAYER, over (51.38, -60.1) to (52.43, -58.7). Piece 3: C228B.1, on TOP_LAYER, over (52.28, -62.48) to (52.9, -61.86). Piece 4: J5B.15, on BOTTOM_LAYER, over (82.4, -188.15) to (84.4, -187.65). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC219C_1NetC219C_1's copper is in 4 pieces: C219C.1 and 2 other piece(s) are not connected to the rest of the net
NetC219C_1's copper is in 4 pieces: C219C.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L11C.2, on TOP_LAYER, over (35.78, -80.81) to (36.93, -79.36). Piece 2: C219C.1, on TOP_LAYER, over (51.38, -74.35) to (52.43, -72.95). Piece 3: C228C.1, on TOP_LAYER, over (52.28, -76.74) to (52.9, -76.12). Piece 4: J5C.15, on TOP_LAYER, over (52.53, -222.91) to (54.53, -222.41). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC219D_1NetC219D_1's copper is in 4 pieces: L11D.2 and 2 other piece(s) are not connected to the rest of the net
NetC219D_1's copper is in 4 pieces: L11D.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: J5D.15, on TOP_LAYER, over (-8.33, -204.8) to (-6.33, -204.3). Piece 2: L11D.2, on TOP_LAYER, over (35.9, -109.27) to (37.05, -107.82). Piece 3: C219D.1, on TOP_LAYER, over (51.51, -102.82) to (52.56, -101.42). Piece 4: C228D.1, on TOP_LAYER, over (52.41, -105.2) to (53.03, -104.58). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC22_1NetC22_1's copper is in 4 pieces: C22.1 and 2 other piece(s) are not connected to the rest of the net
NetC22_1's copper is in 4 pieces: C22.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L6.1, on TOP_LAYER, 3.1 mm2 of pour, over (-86.84, -21.42) to (-84.74, -19.42). Piece 2: C22.1, on TOP_LAYER, over (-89.3, -45.4) to (-86.95, -43.15). Piece 3: C23.2, on TOP_LAYER, over (-91.07, -29.53) to (-90.45, -28.91). Piece 4: J3.29, on TOP_LAYER, over (-117.88, -73.18) to (-116.08, -72.83). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC24_2NetC24_2's copper is in 3 pieces: C24.2 and 1 other piece(s) are not connected to the rest of the net
NetC24_2's copper is in 3 pieces: C24.2 and 1 other piece(s) are not connected to the rest of the net. Piece 1: L4.1, on TOP_LAYER, 3.1 mm2 of pour, over (-79.89, -46.92) to (-77.89, -44.82). Piece 2: C24.2, on TOP_LAYER, over (-78.83, -27.12) to (-78.21, -26.5). Piece 3: C25.1, on TOP_LAYER, over (-82.42, -32.7) to (-80.07, -30.45). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC26_2NetC26_2's copper is in 4 pieces: C26.2 and 2 other piece(s) are not connected to the rest of the net
NetC26_2's copper is in 4 pieces: C26.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L4.2, on TOP_LAYER, 3.1 mm2 of pour, over (-79.89, -50.32) to (-77.89, -48.22). Piece 2: C26.2, on TOP_LAYER, over (-81.95, -27.12) to (-81.33, -26.5). Piece 3: C27.1, on TOP_LAYER, over (-89.3, -49.49) to (-86.95, -47.24). Piece 4: J3.10, on TOP_LAYER, over (-120.39, -73.58) to (-118.59, -73.23). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC28_2NetC28_2's copper is in 4 pieces: C28.2 and 2 other piece(s) are not connected to the rest of the net
NetC28_2's copper is in 4 pieces: C28.2 and 2 other piece(s) are not connected to the rest of the net. Piece 1: L7.1, on TOP_LAYER, 3.1 mm2 of pour, over (-92.85, -25.18) to (-90.75, -23.18). Piece 2: C28.2, on TOP_LAYER, over (-80.39, -27.12) to (-79.77, -26.5). Piece 3: C29.1, on TOP_LAYER, over (-89.33, -41.49) to (-86.98, -39.24). Piece 4: J3.30, on TOP_LAYER, over (-117.88, -72.38) to (-116.08, -72.03). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC2_1NetC2_1's copper is in 3 pieces: X1.2 and 1 other piece(s) are not connected to the rest of the net
NetC2_1's copper is in 3 pieces: X1.2 and 1 other piece(s) are not connected to the rest of the net. Piece 1: IC1.23, on TOP_LAYER, over (254.88, -4.51) to (255.13, -3.49). Piece 2: X1.2, on TOP_LAYER, over (208.11, -28.9) to (209.81, -26.5). Piece 3: C2.1, on TOP_LAYER, over (209.45, -35.56) to (210.07, -34.94). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC52_1NetC52_1's copper is in 4 pieces: C52.1 and 2 other piece(s) are not connected to the rest of the net
NetC52_1's copper is in 4 pieces: C52.1 and 2 other piece(s) are not connected to the rest of the net. Piece 1: CON2.3, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-105.3, -103.42) to (-103.47, -101.59). Piece 2: C52.1, on TOP_LAYER, over (-115.82, -105.5) to (-114.87, -104.5). Piece 3: CON1.3, on BOTTOM_LAYER, over (-138.65, -107.25) to (-135.35, -105.75). Piece 4: CON1.4, on BOTTOM_LAYER, over (-138.65, -112.25) to (-135.35, -110.75). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC52_2NetC52_2's copper is in 3 pieces: CON2.1 and 1 other piece(s) are not connected to the rest of the net
NetC52_2's copper is in 3 pieces: CON2.1 and 1 other piece(s) are not connected to the rest of the net. Piece 1: FH1.2, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-101.64, -113) to (-99.64, -111). Piece 2: CON2.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-110.3, -103.42) to (-108.47, -101.59). Piece 3: C52.2, on TOP_LAYER, over (-117.42, -105.5) to (-116.47, -104.5). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetC56_2NetC56_2's copper is in 4 pieces: CON1.7 and 2 other piece(s) are not connected to the rest of the net
NetC56_2's copper is in 4 pieces: CON1.7 and 2 other piece(s) are not connected to the rest of the net. Piece 1: C56.2, on TOP_LAYER, over (-126.22, -101.9) to (-125.07, -100.1). Piece 2: CON1.7, on BOTTOM_LAYER, over (-133.75, -101.95) to (-130.25, -100.45). Piece 3: CON1.6, on BOTTOM_LAYER, over (-133.75, -117.55) to (-130.25, -116.05). Piece 4: CON1.5, on BOTTOM_LAYER, over (-143.5, -110.75) to (-141.5, -107.25). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetCON1_1NetCON1_1's copper is in 3 pieces: CON1.1 and 1 other piece(s) are not connected to the rest of the net
NetCON1_1's copper is in 3 pieces: CON1.1 and 1 other piece(s) are not connected to the rest of the net. Piece 1: FH1.1, on TOP_LAYER and BOTTOM_LAYER, 1 drill(s), over (-126.64, -113) to (-124.64, -111). Piece 2: CON1.1, on BOTTOM_LAYER, over (-135, -106.85) to (-131.7, -105.35). Piece 3: CON1.2, on BOTTOM_LAYER, over (-135, -112.65) to (-131.7, -111.15). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetD1_3NetD1_3's copper is in 2 pieces: D1.3 is not connected to the rest of the net
NetD1_3's copper is in 2 pieces: D1.3 is not connected to the rest of the net. Piece 1: IC2.2, on TOP_LAYER, over (187.57, 10.08) to (188.48, 10.99). Piece 2: D1.3, on TOP_LAYER, over (187.7, 14.77) to (188.35, 15.82). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_16NetIC1_16's copper is in 2 pieces: IC1.16 is not connected to the rest of the net
NetIC1_16's copper is in 2 pieces: IC1.16 is not connected to the rest of the net. Piece 1: TP1.1, on TOP_LAYER, over (209.16, 9.7) to (210.36, 10.9). Piece 2: IC1.16, on TOP_LAYER, over (251.38, -4.51) to (251.63, -3.49). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_18NetIC1_18's copper is in 2 pieces: IC1.18 is not connected to the rest of the net
NetIC1_18's copper is in 2 pieces: IC1.18 is not connected to the rest of the net. Piece 1: TP2.1, on TOP_LAYER, over (209.16, 19.7) to (210.36, 20.9). Piece 2: IC1.18, on TOP_LAYER, over (252.38, -4.51) to (252.63, -3.49). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_27NetIC1_27's copper is in 2 pieces: R14.2 is not connected to the rest of the net
NetIC1_27's copper is in 2 pieces: R14.2 is not connected to the rest of the net. Piece 1: IC1.27, on TOP_LAYER, over (257.49, -1.63) to (258.51, -1.38). Piece 2: R14.2, on TOP_LAYER, over (209.94, 88.99) to (210.52, 89.61). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_32NetIC1_32's copper is in 2 pieces: R30.2 is not connected to the rest of the net
NetIC1_32's copper is in 2 pieces: R30.2 is not connected to the rest of the net. Piece 1: IC1.32, on TOP_LAYER, over (257.49, 0.88) to (258.51, 1.13). Piece 2: R30.2, on TOP_LAYER, over (190.2, 116.13) to (190.78, 116.75). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_33NetIC1_33's copper is in 2 pieces: R31.2 is not connected to the rest of the net
NetIC1_33's copper is in 2 pieces: R31.2 is not connected to the rest of the net. Piece 1: IC1.33, on TOP_LAYER, over (257.49, 1.38) to (258.51, 1.63). Piece 2: R31.2, on TOP_LAYER, over (197.6, 19.42) to (198.18, 20.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_36NetIC1_36's copper is in 2 pieces: TP3.1 is not connected to the rest of the net
NetIC1_36's copper is in 2 pieces: TP3.1 is not connected to the rest of the net. Piece 1: IC1.36, on TOP_LAYER, over (257.49, 2.88) to (258.51, 3.13). Piece 2: TP3.1, on TOP_LAYER, over (189.42, 57.84) to (190.62, 59.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_40NetIC1_40's copper is in 2 pieces: TP4.1 is not connected to the rest of the net
NetIC1_40's copper is in 2 pieces: TP4.1 is not connected to the rest of the net. Piece 1: IC1.40, on TOP_LAYER, over (257.49, 4.88) to (258.51, 5.13). Piece 2: TP4.1, on TOP_LAYER, over (189.42, 86.84) to (190.62, 88.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_43NetIC1_43's copper is in 2 pieces: TP5.1 is not connected to the rest of the net
NetIC1_43's copper is in 2 pieces: TP5.1 is not connected to the rest of the net. Piece 1: IC1.43, on TOP_LAYER, over (257.49, 6.38) to (258.51, 6.63). Piece 2: TP5.1, on TOP_LAYER, over (189.42, 98.84) to (190.62, 100.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_65NetIC1_65's copper is in 2 pieces: IC1.65 is not connected to the rest of the net
NetIC1_65's copper is in 2 pieces: IC1.65 is not connected to the rest of the net. Piece 1: R13.2, on TOP_LAYER, over (209.94, 42.99) to (210.52, 43.61). Piece 2: IC1.65, on TOP_LAYER, over (248.88, 11.49) to (249.13, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_66NetIC1_66's copper is in 2 pieces: IC1.66 is not connected to the rest of the net
NetIC1_66's copper is in 2 pieces: IC1.66 is not connected to the rest of the net. Piece 1: R9.2, on TOP_LAYER, over (209.45, 36.54) to (210.07, 37.12). Piece 2: IC1.66, on TOP_LAYER, over (248.38, 11.49) to (248.63, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_67NetIC1_67's copper is in 2 pieces: IC1.67 is not connected to the rest of the net
NetIC1_67's copper is in 2 pieces: IC1.67 is not connected to the rest of the net. Piece 1: R8.2, on TOP_LAYER, over (209.45, 31.54) to (210.07, 32.12). Piece 2: IC1.67, on TOP_LAYER, over (247.88, 11.49) to (248.13, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_68NetIC1_68's copper is in 2 pieces: IC1.68 is not connected to the rest of the net
NetIC1_68's copper is in 2 pieces: IC1.68 is not connected to the rest of the net. Piece 1: R7.2, on TOP_LAYER, over (209.45, 27.54) to (210.07, 28.12). Piece 2: IC1.68, on TOP_LAYER, over (247.38, 11.49) to (247.63, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_69NetIC1_69's copper is in 2 pieces: IC1.69 is not connected to the rest of the net
NetIC1_69's copper is in 2 pieces: IC1.69 is not connected to the rest of the net. Piece 1: R6.2, on TOP_LAYER, over (209.45, 23.54) to (210.07, 24.12). Piece 2: IC1.69, on TOP_LAYER, over (246.88, 11.49) to (247.13, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_70NetIC1_70's copper is in 2 pieces: IC1.70 is not connected to the rest of the net
NetIC1_70's copper is in 2 pieces: IC1.70 is not connected to the rest of the net. Piece 1: R5.2, on TOP_LAYER, over (209.45, 13.54) to (210.07, 14.12). Piece 2: IC1.70, on TOP_LAYER, over (246.38, 11.49) to (246.63, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_73NetIC1_73's copper is in 2 pieces: IC1.73 is not connected to the rest of the net
NetIC1_73's copper is in 2 pieces: IC1.73 is not connected to the rest of the net. Piece 1: R4.2, on TOP_LAYER, over (209.45, 3.54) to (210.07, 4.12). Piece 2: IC1.73, on TOP_LAYER, over (244.88, 11.49) to (245.13, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_74NetIC1_74's copper is in 2 pieces: IC1.74 is not connected to the rest of the net
NetIC1_74's copper is in 2 pieces: IC1.74 is not connected to the rest of the net. Piece 1: R3.2, on TOP_LAYER, over (209.45, -0.46) to (210.07, 0.12). Piece 2: IC1.74, on TOP_LAYER, over (244.38, 11.49) to (244.63, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_75NetIC1_75's copper is in 2 pieces: IC1.75 is not connected to the rest of the net
NetIC1_75's copper is in 2 pieces: IC1.75 is not connected to the rest of the net. Piece 1: R2.2, on TOP_LAYER, over (209.45, -5.46) to (210.07, -4.88). Piece 2: IC1.75, on TOP_LAYER, over (243.88, 11.49) to (244.13, 12.51). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_80NetIC1_80's copper is in 2 pieces: IC1.80 is not connected to the rest of the net
NetIC1_80's copper is in 2 pieces: IC1.80 is not connected to the rest of the net. Piece 1: R33.2, on TOP_LAYER, over (197.6, 2.42) to (198.18, 3.04). Piece 2: IC1.80, on TOP_LAYER, over (241.49, 7.88) to (242.51, 8.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_81NetIC1_81's copper is in 2 pieces: IC1.81 is not connected to the rest of the net
NetIC1_81's copper is in 2 pieces: IC1.81 is not connected to the rest of the net. Piece 1: R32.2, on TOP_LAYER, over (197.6, 13.42) to (198.18, 14.04). Piece 2: IC1.81, on TOP_LAYER, over (241.49, 7.38) to (242.51, 7.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_86NetIC1_86's copper is in 2 pieces: IC1.86 is not connected to the rest of the net
NetIC1_86's copper is in 2 pieces: IC1.86 is not connected to the rest of the net. Piece 1: R29.2, on TOP_LAYER, over (190.2, 111.13) to (190.78, 111.75). Piece 2: IC1.86, on TOP_LAYER, over (241.49, 4.88) to (242.51, 5.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_87NetIC1_87's copper is in 2 pieces: IC1.87 is not connected to the rest of the net
NetIC1_87's copper is in 2 pieces: IC1.87 is not connected to the rest of the net. Piece 1: R28.2, on TOP_LAYER, over (190.2, 105.13) to (190.78, 105.75). Piece 2: IC1.87, on TOP_LAYER, over (241.49, 4.38) to (242.51, 4.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_88NetIC1_88's copper is in 2 pieces: IC1.88 is not connected to the rest of the net
NetIC1_88's copper is in 2 pieces: IC1.88 is not connected to the rest of the net. Piece 1: R27.2, on TOP_LAYER, over (190.2, 93.13) to (190.78, 93.75). Piece 2: IC1.88, on TOP_LAYER, over (241.49, 3.88) to (242.51, 4.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_89NetIC1_89's copper is in 2 pieces: IC1.89 is not connected to the rest of the net
NetIC1_89's copper is in 2 pieces: IC1.89 is not connected to the rest of the net. Piece 1: R26.2, on TOP_LAYER, over (190.2, 81.13) to (190.78, 81.75). Piece 2: IC1.89, on TOP_LAYER, over (241.49, 3.38) to (242.51, 3.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_90NetIC1_90's copper is in 2 pieces: IC1.90 is not connected to the rest of the net
NetIC1_90's copper is in 2 pieces: IC1.90 is not connected to the rest of the net. Piece 1: R25.2, on TOP_LAYER, over (190.2, 76.13) to (190.78, 76.75). Piece 2: IC1.90, on TOP_LAYER, over (241.49, 2.88) to (242.51, 3.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_91NetIC1_91's copper is in 2 pieces: IC1.91 is not connected to the rest of the net
NetIC1_91's copper is in 2 pieces: IC1.91 is not connected to the rest of the net. Piece 1: R24.2, on TOP_LAYER, over (190.2, 70.13) to (190.78, 70.75). Piece 2: IC1.91, on TOP_LAYER, over (241.49, 2.38) to (242.51, 2.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_92NetIC1_92's copper is in 2 pieces: IC1.92 is not connected to the rest of the net
NetIC1_92's copper is in 2 pieces: IC1.92 is not connected to the rest of the net. Piece 1: R23.2, on TOP_LAYER, over (190.2, 64.13) to (190.78, 64.75). Piece 2: IC1.92, on TOP_LAYER, over (241.49, 1.88) to (242.51, 2.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_93NetIC1_93's copper is in 2 pieces: IC1.93 is not connected to the rest of the net
NetIC1_93's copper is in 2 pieces: IC1.93 is not connected to the rest of the net. Piece 1: R22.2, on TOP_LAYER, over (190.2, 52.13) to (190.78, 52.75). Piece 2: IC1.93, on TOP_LAYER, over (241.49, 1.38) to (242.51, 1.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_94NetIC1_94's copper is in 2 pieces: IC1.94 is not connected to the rest of the net
NetIC1_94's copper is in 2 pieces: IC1.94 is not connected to the rest of the net. Piece 1: R21.2, on TOP_LAYER, over (190.2, 46.13) to (190.78, 46.75). Piece 2: IC1.94, on TOP_LAYER, over (241.49, 0.88) to (242.51, 1.13). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC1_95NetIC1_95's copper is in 2 pieces: IC1.95 is not connected to the rest of the net
NetIC1_95's copper is in 2 pieces: IC1.95 is not connected to the rest of the net. Piece 1: R20.2, on TOP_LAYER, over (190.2, 41.13) to (190.78, 41.75). Piece 2: IC1.95, on TOP_LAYER, over (241.49, 0.38) to (242.51, 0.63). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC20A_5NetIC20A_5's copper is in 2 pieces: IC20A.5 is not connected to the rest of the net
NetIC20A_5's copper is in 2 pieces: IC20A.5 is not connected to the rest of the net. Piece 1: R109A.1, on TOP_LAYER, over (41.45, -90.61) to (42.35, -89.61). Piece 2: IC20A.5, on TOP_LAYER, over (50.98, -97.9) to (52.08, -97.3). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC20B_5NetIC20B_5's copper is in 2 pieces: IC20B.5 is not connected to the rest of the net
NetIC20B_5's copper is in 2 pieces: IC20B.5 is not connected to the rest of the net. Piece 1: R109B.1, on TOP_LAYER, over (41.45, -62.24) to (42.35, -61.24). Piece 2: IC20B.5, on TOP_LAYER, over (50.98, -69.53) to (52.08, -68.93). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC20C_5NetIC20C_5's copper is in 2 pieces: IC20C.5 is not connected to the rest of the net
NetIC20C_5's copper is in 2 pieces: IC20C.5 is not connected to the rest of the net. Piece 1: R109C.1, on TOP_LAYER, over (41.45, -76.5) to (42.35, -75.5). Piece 2: IC20C.5, on TOP_LAYER, over (50.98, -83.79) to (52.08, -83.19). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC20D_5NetIC20D_5's copper is in 2 pieces: IC20D.5 is not connected to the rest of the net
NetIC20D_5's copper is in 2 pieces: IC20D.5 is not connected to the rest of the net. Piece 1: R109D.1, on TOP_LAYER, over (41.58, -104.96) to (42.48, -103.96). Piece 2: IC20D.5, on TOP_LAYER, over (51.11, -112.25) to (52.21, -111.65). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC6_30NetIC6_30's copper is in 2 pieces: R50.2 is not connected to the rest of the net
NetIC6_30's copper is in 2 pieces: R50.2 is not connected to the rest of the net. Piece 1: IC6.30, on TOP_LAYER, over (-116.04, -15.38) to (-115.34, -15.13). Piece 2: R50.2, on TOP_LAYER, over (224.38, -26.02) to (225, -25.44). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetIC7_30NetIC7_30's copper is in 2 pieces: R51.2 is not connected to the rest of the net
NetIC7_30's copper is in 2 pieces: R51.2 is not connected to the rest of the net. Piece 1: IC7.30, on TOP_LAYER, over (-117.04, 20.63) to (-116.34, 20.88). Piece 2: R51.2, on TOP_LAYER, over (125.83, -26.02) to (126.45, -25.44). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD1A_1NetLD1A_1's copper is in 2 pieces: R1A.2 is not connected to the rest of the net
NetLD1A_1's copper is in 2 pieces: R1A.2 is not connected to the rest of the net. Piece 1: LD1A.1, on TOP_LAYER, over (-27.57, -89) to (-26.87, -88.2). Piece 2: R1A.2, on TOP_LAYER, over (36.29, -90.61) to (37.19, -89.61). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD1B_1NetLD1B_1's copper is in 2 pieces: LD1B.1 is not connected to the rest of the net
NetLD1B_1's copper is in 2 pieces: LD1B.1 is not connected to the rest of the net. Piece 1: R1B.2, on TOP_LAYER, over (36.29, -62.24) to (37.19, -61.24). Piece 2: LD1B.1, on TOP_LAYER, over (36.65, -56.4) to (37.35, -55.6). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD1C_1NetLD1C_1's copper is in 2 pieces: R1C.2 is not connected to the rest of the net
NetLD1C_1's copper is in 2 pieces: R1C.2 is not connected to the rest of the net. Piece 1: LD1C.1, on TOP_LAYER, over (-27.57, -74.89) to (-26.87, -74.09). Piece 2: R1C.2, on TOP_LAYER, over (36.29, -76.5) to (37.19, -75.5). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD1D_1NetLD1D_1's copper is in 2 pieces: R1D.2 is not connected to the rest of the net
NetLD1D_1's copper is in 2 pieces: R1D.2 is not connected to the rest of the net. Piece 1: LD1D.1, on TOP_LAYER, over (-27.45, -103.35) to (-26.75, -102.55). Piece 2: R1D.2, on TOP_LAYER, over (36.42, -104.96) to (37.32, -103.96). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD2A_1NetLD2A_1's copper is in 2 pieces: R11A.2 is not connected to the rest of the net
NetLD2A_1's copper is in 2 pieces: R11A.2 is not connected to the rest of the net. Piece 1: LD2A.1, on TOP_LAYER, over (-27.45, -97.3) to (-26.75, -96.5). Piece 2: R11A.2, on TOP_LAYER, over (41.51, -94.04) to (42.41, -93.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD2B_1NetLD2B_1's copper is in 2 pieces: R11B.2 is not connected to the rest of the net
NetLD2B_1's copper is in 2 pieces: R11B.2 is not connected to the rest of the net. Piece 1: LD2B.1, on TOP_LAYER, over (-27.45, -68.93) to (-26.75, -68.13). Piece 2: R11B.2, on TOP_LAYER, over (41.51, -65.67) to (42.41, -64.67). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD2C_1NetLD2C_1's copper is in 2 pieces: R11C.2 is not connected to the rest of the net
NetLD2C_1's copper is in 2 pieces: R11C.2 is not connected to the rest of the net. Piece 1: LD2C.1, on TOP_LAYER, over (-27.45, -83.19) to (-26.75, -82.39). Piece 2: R11C.2, on TOP_LAYER, over (41.51, -79.93) to (42.41, -78.93). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLD2D_1NetLD2D_1's copper is in 2 pieces: R11D.2 is not connected to the rest of the net
NetLD2D_1's copper is in 2 pieces: R11D.2 is not connected to the rest of the net. Piece 1: LD2D.1, on TOP_LAYER, over (-27.32, -111.65) to (-26.62, -110.85). Piece 2: R11D.2, on TOP_LAYER, over (41.63, -108.39) to (42.53, -107.39). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLED1_ANetLED1_A's copper is in 5 pieces: Q13.8 and 3 other piece(s) are not connected to the rest of the net
NetLED1_A's copper is in 5 pieces: Q13.8 and 3 other piece(s) are not connected to the rest of the net. Piece 1: LED1.A, on TOP_LAYER, over (-90.6, -127.11) to (-89.1, -126.41). Piece 2: Q13.8, on TOP_LAYER, over (-94.37, -127.37) to (-92.34, -126.76). Piece 3: Q13.7, on TOP_LAYER, over (-94.37, -128.64) to (-92.34, -128.03). Piece 4: Q13.6, on TOP_LAYER, over (-94.37, -129.91) to (-92.34, -129.3). Piece 5: Q13.5, on TOP_LAYER, over (-94.37, -131.18) to (-92.34, -130.57). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLED1_KNetLED1_K's copper is in 2 pieces: R54.2 is not connected to the rest of the net
NetLED1_K's copper is in 2 pieces: R54.2 is not connected to the rest of the net. Piece 1: LED1.K, on TOP_LAYER, over (-90.6, -130.26) to (-89.1, -129.56). Piece 2: R54.2, on TOP_LAYER, over (-119.43, -137.14) to (-118.43, -136.24). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLED2_ANetLED2_A's copper is in 5 pieces: Q1.8 and 3 other piece(s) are not connected to the rest of the net
NetLED2_A's copper is in 5 pieces: Q1.8 and 3 other piece(s) are not connected to the rest of the net. Piece 1: LED2.A, on TOP_LAYER, over (-87.37, -127.11) to (-85.87, -126.41). Piece 2: Q1.8, on TOP_LAYER, over (-102.7, -127.37) to (-100.67, -126.76). Piece 3: Q1.7, on TOP_LAYER, over (-102.7, -128.64) to (-100.67, -128.03). Piece 4: Q1.6, on TOP_LAYER, over (-102.7, -129.91) to (-100.67, -129.3). Piece 5: Q1.5, on TOP_LAYER, over (-102.7, -131.18) to (-100.67, -130.57). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetLED2_KNetLED2_K's copper is in 2 pieces: LED2.K is not connected to the rest of the net
NetLED2_K's copper is in 2 pieces: LED2.K is not connected to the rest of the net. Piece 1: R55.2, on TOP_LAYER, over (-71.75, -127.48) to (-70.75, -126.58). Piece 2: LED2.K, on TOP_LAYER, over (-87.37, -130.26) to (-85.87, -129.56). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetQ13_4NetQ13_4's copper is in 3 pieces: Q13.4 and 1 other piece(s) are not connected to the rest of the net
NetQ13_4's copper is in 3 pieces: Q13.4 and 1 other piece(s) are not connected to the rest of the net. Piece 1: Q14.3, on TOP_LAYER, over (-82.56, -128.68) to (-81.51, -128.03). Piece 2: Q13.4, on TOP_LAYER, over (-99.96, -131.18) to (-97.93, -130.57). Piece 3: R52.1, on TOP_LAYER, over (-110.76, -137.64) to (-110.16, -137.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetQ1_4NetQ1_4's copper is in 3 pieces: Q1.4 and 1 other piece(s) are not connected to the rest of the net
NetQ1_4's copper is in 3 pieces: Q1.4 and 1 other piece(s) are not connected to the rest of the net. Piece 1: Q2.3, on TOP_LAYER, over (-78, -128.68) to (-76.95, -128.03). Piece 2: Q1.4, on TOP_LAYER, over (-108.29, -131.18) to (-106.26, -130.57). Piece 3: R122.1, on TOP_LAYER, over (-109.3, -137.64) to (-108.7, -137.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetR11A_1NetR11A_1's copper is in 2 pieces: R11A.1 is not connected to the rest of the net
NetR11A_1's copper is in 2 pieces: R11A.1 is not connected to the rest of the net. Piece 1: T1A.3, on TOP_LAYER, over (42.09, -96.92) to (43.14, -96.27). Piece 2: R11A.1, on TOP_LAYER, over (43.11, -94.04) to (44.01, -93.04). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetR11B_1NetR11B_1's copper is in 2 pieces: R11B.1 is not connected to the rest of the net
NetR11B_1's copper is in 2 pieces: R11B.1 is not connected to the rest of the net. Piece 1: T1B.3, on TOP_LAYER, over (42.09, -68.55) to (43.14, -67.9). Piece 2: R11B.1, on TOP_LAYER, over (43.11, -65.67) to (44.01, -64.67). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetR11C_1NetR11C_1's copper is in 2 pieces: R11C.1 is not connected to the rest of the net
NetR11C_1's copper is in 2 pieces: R11C.1 is not connected to the rest of the net. Piece 1: T1C.3, on TOP_LAYER, over (42.09, -82.81) to (43.14, -82.16). Piece 2: R11C.1, on TOP_LAYER, over (43.11, -79.93) to (44.01, -78.93). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetR11D_1NetR11D_1's copper is in 2 pieces: R11D.1 is not connected to the rest of the net
NetR11D_1's copper is in 2 pieces: R11D.1 is not connected to the rest of the net. Piece 1: T1D.3, on TOP_LAYER, over (42.22, -111.27) to (43.27, -110.62). Piece 2: R11D.1, on TOP_LAYER, over (43.23, -108.39) to (44.13, -107.39). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
split:NetR1A_1NetR1A_1's copper is in 2 pieces: T2A.3 is not connected to the rest of the net
NetR1A_1's copper is in 2 pieces: T2A.3 is not connected to the rest of the net. Piece 1: R1A.1, on TOP_LAYER, over (37.89, -90.61) to (38.79, -89.61). Piece 2: T2A.3, on TOP_LAYER, over (46.55, -96.92) to (47.6, -96.27). The export files every one of these pins under the net, so every connectivity check passes; the copper the fab builds leaves them apart. Usually a pour island that touches only one via of its own net, or a track ending short of its copper: join the piece to the net and export again.
The published PCB is an unrouted placement that does not implement the published schematic set
The repository PCB cannot be built as published. It is a placement with no copper tracks, and its connectivity is an earlier design than the 20 schematic sheets.
What the PCB file holds
Check PCB (ODB++ export of PCB/AMC_uBACKPLANE.PcbDoc) Tracks on top / bottom copper 0 / 0 line features Polygon pours 0 before and after repour Inner layers 2 negative plane layers, outline only Designators shared with the schematics 146 of 294 What differs from the schematics
- On the schematics, not on the PCB: NCP3170 buck converters IC9/IC10 (Supply), CP2102 USB-UART IC13, LAN8720A Ethernet PHY IC14 with RJ45, MAX7357 I2C switch IC16, MAX6639 fan controller IC12.
- On the PCB, not on the schematics: four SN65LVDS2 clock receivers IC20A-D.
- Consequence, SFP management: on the PCB, SCL and SDA of all four SFP+ cages J5A-J5D are one net with no pull-up and no host. SFP modules answer at fixed addresses, so they cannot share a bus. The schematics route each cage through the MAX7357.
In the PCB netlist the 3.3 V rails have no source and the switched 12 V never reaches the AMC slots
In the PCB netlist the 3.3 V rails P3V3 and P3V3MP have no source and the switched 12 V from Q1/Q13 never reaches the AMC slots, so a board built from it powers nothing.
What has no source
Net Loads Missing P3V3 (93 pins) SN65MLVD040 IC6/IC7, SN65LVDS2 IC20A-D, PCF8574 IC5, the SFP ferrites L5A-D/L11A-D, the LED anodes LD1/LD2, decoupling, pull-ups no regulator, connector pin or jumper drives it P3V3MP (25 pins) LPC1764 IC1, STM809 IC2, AT24MAC602 IC3, the debug headers JP1/JP2, FB1.2 no regulator, connector pin or jumper drives it NetC16_2 C16, C17, L1/L2/L3 input for QSFP J2 no source NetC24_2 C24, C25, L4 input for QSFP J3 no source L6.2, L7.2 on no net The AMC payload path
``
mermaid flowchart LR EN1["EN_AMC1_PWR<br/>only R305 10k to GND"] --> Q14["Q14"] --> Q13["Q13 IRF9310"] EN2["EN_AMC2_PWR<br/>only R53 10k to GND"] --> Q2["Q2"] --> Q1["Q1 IRF9310"] P12["P12V"] --> Q1 P12 --> Q13 Q1 --> L2["LED2 anode only"] Q13 --> L1["LED1 anode only"] PW["PWRA on J1A, PWRB on J1B"] -.- X["connected to nothing else"]``- PWRA (J1A pins 2, 9, 18, 27, 42, 57, 72, 84) and PWRB (J1B, same pins) connect to nothing else.
- The high-side switches Q1 and Q13 switch P12V onto nets that reach only LED2 and LED1.
- Their gate drivers Q2 and Q14 take EN_AMC2_PWR and EN_AMC1_PWR, which carry only a 10k pull-down and no driver.
The Supply sheet (page 10) draws the missing sources: NCP3170 IC9/IC10 for SFP_P3V3/QSFP_P3V3, and Q1/T3 switching AMC1_PWR/AMC2_PWR.
Why it matters
A board built from this database would receive 12 V on CON1 and power nothing: no 3.3 V for the controller or the SFP/QSFP modules, and no payload power for either AMC slot. This is the same root cause as the schematic/PCB mismatch, stated separately because it is the first thing a builder would hit.
- I2cPullupMissingmajorOpen
I2cPullupMissing: 2 nets×2
Checked by the review, stands · evaluation@esharp.se — Checked; stands. TEMP_SDA/TEMP_SCL join only IC1 LPC1764 pins 46/47 (P0[0]/P0[1], GPIO used in their SDA1/SCL1 alternate, datasheet p.10) and IC3 AT24MAC602 pins 5/6. Netlist: no external pull-up resistor sits on either net, and P0[0]/P0[1] are not dedicated open-drain I2C pads, so the bus relies at most on the MCU's weak internal pin pull-up. Owner to confirm whether external pull-ups were intended.
At TEMP_SCL, TEMP_SDA
Each finding, with its own headline
- TEMP_SCLI²C net 'TEMP_SCL' has no pull-up to a power rail.
- TEMP_SDAI²C net 'TEMP_SDA' has no pull-up to a power rail.
- PartLifecyclemajorOpen
PartLifecycle: 2 part numbers×2
1 Obsolete, 1 Discontinued at DigiKey · on 3 placements
At Designator4, Q1
Each finding, with its own headline
Designator40757830107 on Designator4: the distributor catalogue reports "Obsolete" for Molex's 0757830107
0757830107 on Designator4: the distributor catalogue reports "Obsolete" for Molex's 0757830107 — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. That is the maker this board's BOM names (Molex). A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/0757830107/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). THE LAST BUY DATE HAS PASSED (2025-11-01, 379 day(s) ago), so this is a substitution rather than a buy. The distributor reports NONE left. No approved alternate is recorded for this position.
Q1IRF9310PbF on 2 placements (Q1, Q13): the distributor catalogue reports "Discontinued at DigiKey" for Infineon Technologies's IRF9310PBF
IRF9310PbF on 2 placements (Q1, Q13): the distributor catalogue reports "Discontinued at DigiKey" for Infineon Technologies's IRF9310PBF — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. That is the maker this board's BOM names (Infineon). A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/IRF9310PbF/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). No approved alternate is recorded for this position.
- PartLifecyclemajorOpen
PartLifecycle: 2 part numbers×2
2 Obsolete · on 10 placements
At IC5, J10
Each finding, with its own headline
IC5PCF8574ADW on IC5: the distributor catalogue reports "Obsolete" for Texas Instruments's PCF8574ADW
PCF8574ADW on IC5: the distributor catalogue reports "Obsolete" for Texas Instruments's PCF8574ADW — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. That is the maker this board's BOM names (Texas Instruments). A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/PCF8574ADW/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). THE LAST BUY DATE HAS PASSED (2023-11-04, 1,107 day(s) ago), so this is a substitution rather than a buy. The distributor reports 159 left. No approved alternate is recorded for this position.
J1085_SMA-50-0-101/111_NE on 9 placements (J10, J11, J12, J21, J4, J6, J7, J8, …): the distributor catalogue reports "Obsolete" for Huber+Suhner, Inc.'s 85_SMA-50-0-101/111_NE
85_SMA-50-0-101/111_NE on 9 placements (J10, J11, J12, J21, J4, J6, J7, J8, …): the distributor catalogue reports "Obsolete" for Huber+Suhner, Inc.'s 85_SMA-50-0-101/111_NE — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. That is the maker this board's BOM names (Huber+Suhner). A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/85_SMA-50-0-101/111_NE/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). THE LAST BUY DATE HAS PASSED (2025-12-31, 319 day(s) ago), so this is a substitution rather than a buy. The distributor reports NONE left. No approved alternate is recorded for this position.
- FiducialMissingmajorOpen
The top side carries 137 SMT component(s) and no fiducial was found on it
The top side carries 137 SMT component(s) but no fiducial was found on it — a placement machine has no optical reference to align to. Probe found no pad labelled .pad_usage=g_fiducial/l_fiducial (basis pad_usage); no single-pad, netless, undrilled component whose 0.5-3 mm round pad has a concentric solder-mask opening at least 1.5x its diameter with no other copper inside it (basis geometry); and no component whose refdes starts FID or whose part or package name contains FIDUCIAL (basis footprint-name). If your library names fiducials something Probe does not recognise, mark this benign — disposition_finding(rule='FiducialMissing', entity='top', status='benign', reason=…) — the name match only ever silences this check, it never asserts anything. If the side really has no fiducial, say so with status='confirmed': that answers the finding and keeps it gating release.
At top
The shared SFP clock pair is terminated four times (25 ohm), below what an LVDS driver needs to reach the receivers threshold
The shared SFP clock pair SFP_CLK8.CLOCK_P/N is terminated four times (R105A-D, 25 ohm combined), so a standard LVDS driver would give about 90 mV, below the 100 mV the SN65LVDS2 receivers need.
The numbers
Quantity Value Source Receivers on the pair four SN65LVDS2, IC20A-D (pins 3 and 4) netlist Termination per receiver 100 ohm 1 %, R105A-D netlist Load seen by the pair 100 / 4 = 25 ohm derived Standard LVDS drive current about 3.5 mA statement Differential voltage about 3.5 mA x 25 ohm = roughly 90 mV derived SN65LVDS2 input threshold +/-100 mV SN65LVDS2 datasheet, p.14 No driver for the pair exists on the board; it comes from nowhere in the PCB netlist.
Why it matters
A multidrop LVDS clock should be terminated once, at the far end, or fanned out through a buffer with one termination per receiver. Probe flagged the four parallel resistors as DuplicatePassive. This circuit is on the PCB only; the schematics have no SN65LVDS2.
The 16 A input fuse does not protect the 7.5 A input connector or the 15 A EMI filter
The 16 A input fuse F1 does not protect the 7.5 A input connector CON1 or the 15 A EMI filter CON2: a fault current between their ratings and 16 A flows indefinitely.
The input path
``
mermaid flowchart LR CON1["CON1 Kycon KPJX-4S-S<br/>7.5 A per pin, +12 V on pins 1-2"] --> F1["FH1 / F1<br/>16A-250VAC, Schurter 0034.3129"] F1 --> CON2["CON2 Murata BNX016-01<br/>15 A DC"] -- "CON2.8" --> P12["P12V"]``The return runs from CON1 pins 3-4 to CON2.3.
The ratings
Element Rating Source CON1 connector 48 V DC, 7.5 A max for all pins KPJX-4S-S datasheet, p.1 CON2 filter 15 A DC, derated with temperature BNX016-01 datasheet, p.1 F1 fuse 16 A Supply sheet, page 10; BOM LibRef FUSE_SCHURTER_0034.3129 A fault current between 7.5 A (or 15 A with perfect sharing across two pins) and 16 A is carried indefinitely without the fuse opening.
Why it matters
The fuse should sit at or below the lowest-rated element in series, here the connector. The Supply sheet note puts SFP/QSFP worst case at about 7-8 A peak before any AMC payload, and two AMC modules can each draw several amperes at 12 V, so the connector rating is the real limit. Either a lower fuse or a higher-rated input connector is needed.
The 1.27 mm 2x5 debug header JP2 does not follow the ARM Cortex 10-pin pinout that a standard cable assumes
Debug header JP2 has the 1.27 mm 2x5 form of the ARM Cortex 10-pin connector but a board-specific pinout, so a standard debug cable would drive the probe's SWDIO into GND and its SWCLK into 3.3 V.
Pin by pin
JP2 pin Board signal Cortex 10-pin assignment 1 SWCLK VTref 2 GND (GA0A) SWDIO/TMS 3 PROG_TXD GND 4 P3V3MP SWCLK/TCK 5 SWDIO GND 6 RST SWO/TDO 7 unconnected key 8 BOOT NC/TDI 9 PROG_RXD GNDDetect 10 GND (GA0A) nRESET Sources: netlist (component JP2); ARM Cortex Debug Connector (10-pin 0.05 in).
Fix
Either follow the Cortex 10-pin assignment on JP2 (the UART/BOOT signals can go on JP1 or a separate header), or mark the custom pinout on the silkscreen and in the documentation.
Schematic title blocks carry no revision and an open design question; the PCB has unannotated parts and no fiducials
The schematic title blocks carry no revision and still hold an open design question, and the PCB has unannotated, unconnected parts and no fiducials: the design reads as work in progress.
Schematic
- Every sheet has
*in the Rev field. - The sheet counter reads "of 15" on a 20-page set, and page 20 (UFL) has
*for both. - Sheet 1 still carries a design-discussion note: "What do you think about having some differential (LEMO) and other single-ended (SMA) input/outputs for triggers and clocks?"
- The Supply sheet (page 10) power-budget note shows spreadsheet errors (
#NAME?) in place of its totals.
PCB
- Three placed parts keep default designators, and all three have every pin on no net:
- Designator4, the Molex iPass connector (75783-0107, 44 pins);
- Designator6 and Designator7, U.FL connectors.
- OSC1 (SG-8002CA) and J21 (SMA) are also unconnected.
- Neither side has a fiducial.
Why it matters
That is fine for an archive, but the repository should say so, and a revision should be set before anyone orders boards from it.
- Every sheet has
The 20 V tantalum bulk capacitors C54/C55 sit directly on the 12 V input with only 1.7x voltage margin
The 100 uF 20 V tantalum bulk capacitors C54/C55 sit directly on the 12 V input with only 1.7x voltage margin, where MnO2 tantalum on a supply input calls for 50 % derating.
Where it is
C54 and C55 are on P12V, immediately after the input fuse and the BNX016-01 filter. P12V also holds C53, CON2.8 (filter output), D2, the Q1/Q13 sources, R52 and R122.
The numbers
Quantity Value Source Part 100 uF 20 V tantalum, 7343-43 case, LibRef CTE7343-43_100UF_20V_10%_LESR0150; no manufacturer or MPN BOM Likely equivalent a low-ESR MnO2 part such as AVX TPSE107K020R0150 inferred from LibRef MnO2 derating on a supply input exposed to surge 50 %, so 10 V on a 20 V part KEMET / AVX guidance Operating voltage 12 V P12V Margin 20 / 12 = about 1.7x derived That is before counting the hot-plug and cable transients that D2 (1.5KE15A, clamping up to about 20 V) lets through.
Why it matters
A failed MnO2 tantalum fails short. Here it sits behind a 16 A fuse on the board input, so it can burn before the fuse opens. Use 35 V MnO2 tantalum, or a polymer tantalum or ceramic whose derating rule 20 V meets, and name the part in the BOM. Probe raised this as CapVoltageDerating; the knowledge gap is recorded as searched.
The I2C bus to the AT24MAC602 MAC-address EEPROM has no pull-up resistors
The I2C bus TEMP_SCL/TEMP_SDA to the AT24MAC602 MAC-address EEPROM (IC3) has no pull-up resistors, so reading the board's EUI-48 address depends on firmware and bus capacitance.
Where it is
Net Members TEMP_SCL IC1 LPC1764 P0[1]/SCL1 pin 47, IC3 AT24MAC602 pin 6 TEMP_SDA IC1 LPC1764 P0[0]/SDA1 pin 46, IC3 AT24MAC602 pin 5 No resistor sits on either net. The PCF8574A IC5 has its SCL/SDA pins (14, 15) on no net at all (NetIC5_14, NetIC5_15 are single-pin nets).
Why it matters
- The AT24MAC602 SDA pin is open-drain and Microchip requires an external pull-up of at most 10 kohm (datasheet, p.5).
- The LPC1764 internal pull-up on these pins is a weak current source, not an I2C pull-up.
So reads of the EEPROM and its factory EUI-48 MAC address depend on firmware enabling it and on low bus capacitance. Add 2k2-10k pull-ups from TEMP_SCL and TEMP_SDA to P3V3MP. The expander wiring is part of the PCB/schematic mismatch in OBS-397. Probe raised this as I2cPullupMissing.
SFP status LEDs LD1A-D/LD2A-D can never light: their BSS138 gate nets have a pull-down and no driver
In the PCB netlist the eight SFP status LEDs (LD1A-D, LD2A-D) are switched by BSS138 transistors whose gates carry only a 10k pull-down and no driver, so the LEDs stay dark whatever the SFP modules do.
The drive path (same on all four cages A-D)
LED Current path Switch Gate net Gate connections LD1x HSME-C120 P3V3 -> LED -> R1x 330R -> drain T2x BSS138, source on ground (net GA0A) SFP_LED1x R10x 10k to ground only LD2x HSMC-C120 P3V3 -> LED -> R11x 330R -> drain T1x BSS138, source on ground SFP_LED2x R12x 10k to ground only Nothing else (no SFP cage pin, expander output or MCU pin) connects to SFP_LED1A-D or SFP_LED2A-D.
``
mermaid flowchart LR P3V3 --> LED["LD1x / LD2x"] --> R["330R"] --> T["BSS138 drain"] G["SFP_LEDnx gate"] --- PD["10k to GND"] G -.->|no driver| X["nothing"]``Why it matters
With the gate held low the transistor never conducts, so the link/activity indicators are permanently off. The current limit itself is fine: (3.3 V - 2.1 V Vf) / 330 R is about 3.6 mA, against the 20 mA (HSME) and 25 mA (HSMC) ratings. This is another symptom of the PCB database being an earlier design than the schematics (OBS-397).
BNX016-01 went end-of-life (Last Time Buy)
Vendor (DigiKey) lifecycle for BNX016-01 (Murata Electronics's listing) changed from "Active" to "Last Time Buy" since this board was reviewed. Placed as CON2. A sourcing/longevity risk; consider a replacement before production.
- concernCON-001minorOpen
[eol:BNX016-01:Last Time Buy] BNX016-01 lifecycle changed from "Active" to "Last Time Buy" since this board was reviewed: OHWR0030 R1 AMC UBACKPLANE SFP. A sourcing and longevity risk. Should this be replaced before the next build?
- DuplicatePassiveminorOpen
'SFP_CLK8.CLOCK_N' and 'SFP_CLK8.CLOCK_P' are bridged by 4 fitted resistors (R105A (100), R105B (100), R105C (100), R105D (100))
'SFP_CLK8.CLOCK_N' and 'SFP_CLK8.CLOCK_P' are bridged by 4 fitted resistors: R105A (100), R105B (100), R105C (100), R105D (100) — 25R effective. Declare the intent: a second footprint provided for tuning is ordinary, and so is a mistake that halves a series or termination value. Nothing here says which this is.
At SFP_CLK8.CLOCK_N
- PartLifecycleminorOpen
BNX016-01 on CON2: the distributor catalogue reports "Last Time Buy" for Murata Electronics's BNX016-01
BNX016-01 on CON2: the distributor catalogue reports "Last Time Buy" for Murata Electronics's BNX016-01 — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. That is the maker this board's BOM names (Murata). A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/BNX016-01/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). LAST BUY 2027-09-30 — 319 day(s) remaining to place a final order. The distributor reports 804 left. No approved alternate is recorded for this position.
At CON2
- FiducialMissingminorOpen
The bottom side carries 5 SMT component(s) and no fiducial was found on it
The bottom side carries 5 SMT component(s) but no fiducial was found on it — a placement machine has no optical reference to align to. Probe found no pad labelled .pad_usage=g_fiducial/l_fiducial (basis pad_usage); no single-pad, netless, undrilled component whose 0.5-3 mm round pad has a concentric solder-mask opening at least 1.5x its diameter with no other copper inside it (basis geometry); and no component whose refdes starts FID or whose part or package name contains FIDUCIAL (basis footprint-name). If your library names fiducials something Probe does not recognise, mark this benign — disposition_finding(rule='FiducialMissing', entity='bottom', status='benign', reason=…) — the name match only ever silences this check, it never asserts anything. If the side really has no fiducial, say so with status='confirmed': that answers the finding and keeps it gating release. Graded minor: the side carries only 5 SMT part(s) (at most 5), which a placement machine can usually align on their own pads; a fine-pitch part among them would still want one.
At bottom
Main parts
| Part number | Maker | Description | Where |
|---|---|---|---|
| 0031.8211 | Schurter | Fuse Holder | FH1 |
| 0034.3129 | Schurter | Fuse | F1 |
| 0757830107 | Molex | Comment | Designator4 |
| 0853.0551 | Schurter | Fuse Holder Cover No Pin | FHC1 |
| 1.5KE15A | Vishay | Transient Voltage Suppressor Diode (Uni-Directional) | D2 |
| AT24MAC602-XHM-T | Microchip | Serial 2K EEPROM+ 48bit MAC | IC3 |
| BAT54 | Diode Schottky Anode Pin 1 Cathode Pin 3 (Pas de pin 2) | D1 | |
| BNX016-01 | Murata | FILTER EMI 50MOHM 15A .1M-1GHZ | CON2 |
| KPJX-4S-S | Kycon | 7.5A DC connector | CON1 |
| KSS241G LFS | C&K | Push button | SW1 |
| LPC1764FBD100 | NXP | ARM Cortex-M3 procesor | IC1 |
| PCF8574ADW | Texas Instruments | Remote 8-bit I/O Expander For I2C Bus | IC5 |
| QSDG8M000 | TXC | miniature crystal oscillator (Maritex) QSDG8M000-TXC | X1 |
| SG-8002CA | Epson | Oscillator 4 pins 1=OE 2=GND 3=OUT 4=VCC | OSC1 |
| STM809SWX6F | STMicroelectronics | 2.93V Reset circuit | IC2 |
| 1761987-9 | TE Connectivity | 38Position QSFP Connector (Quad Small Form-factor Pluggable) | J2, J3 |
| 1888781-1 | TE Connectivity | QSFP+ 1x3 Cage (23Pins) | Cage1, Cage3 |
| BSS138 | onsemi | BSS138 | Q14, Q2 |
| IRF9310PbF | Infineon | PMOS 30V, 4.6mR, 20A, 2.5W | Q1, Q13 |
| LEDRA3010-GYW120 | LED (Maritex) | LED1, LED2 | |
| MTCA-085-02-S-DV-SMT-K-TR | Samtec | 170 Poles, Micro TCA (Telecom Computing Architecture) Edge Card Socket | J1A, J1B |
| SN65MLVD040RGZT | Texas Instruments | SN65MLVD040RGZT | IC6, IC7 |
| U.FL-R-SMT-1 | Hirose | Comment | Designator6, Designator7 |
| 1888247-1 | TE Connectivity | 20 Position SFP+ Connector (Small Form-factor Pluggable) | J5A, J5B, J5C, J5D |
| 6367034-1 | TE Connectivity | SFP Cage Bottom (Small Form-factor Pluggable) | CageBot1A, CageBot1B, CageBot1C, CageBot1D |
| 6367035-1 | TE Connectivity | SFP Cage Top (Small Form-factor Pluggable) | CageTop1A, CageTop1B, CageTop1C, CageTop1D |
| HSMC-C120 | Broadcom | LED Red 1C 2A | LD2A, LD2B, LD2C, LD2D |
| HSME-C120 | Broadcom | LED Green 1C 2A | LD1A, LD1B, LD1C, LD1D |
| SN65LVDS2DBVR | Texas Instruments | High-Speed Differential Line Receiver | IC20A, IC20B, IC20C, IC20D |
| 313.1730.0.00.40.0 | Comatel | Jumper 1 Pin | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 385.0358.1.02.400 | Comatel | 2 Mini Wire-Wrap Contact Strip Header | W1, W2, W3, W4, W5, W6, W7, W8 |
| BSS138LT1G | onsemi | N-CHANNEL MOSFET WITH DIODE | T1A, T1B, T1C, T1D, T2A, T2B, T2C, T2D |
| EPG.00.302.NLN | LEMO | LEMO 00 | J13, J14, J15, J16, J17, J18, J19, J20 |
| 85_SMA-50-0-101/111_NE | Huber+Suhner | SMA | J10, J11, J12, J21, J4, J6 and 3 more |
| LQH32CN1R0M33 | Murata | Inductor With Magnetic core | L1, L2, L3, L4, L6, L7 |
| BLM21PG221SN1D | Murata | Inductor | FB1, L11A, L11B, L11C, L11D, L5A and 3 more |
About this design
- Design
- AMC UBACKPLANE SFP — OHWR0030 R1
- Designed in
- Altium Designer
- Board
- 4 copper layers, 245 × 158 mm, 292 components, 359 nets
- Licence
- CERN-OHL-1.1
- Source
- https://gitlab.com/ohwr/project/amc-ubackplane-sfp at commit
ae8405454982 - Attribution
- CERN Open Hardware Repository, project ohwr/project/amc-ubackplane-sfp (commit ae84054549821594acad83edf4b780fc302ec333, 2025-04-09). Licence: CERN-OHL-1.1 (stated on the schematic sheets). Source: https://gitlab.com/ohwr/project/amc-ubackplane-sfp. This is a snapshot of the copy published on the OHWR GitLab pages (R1), not CERN's released record. CERN's source of truth is EDMS (https://edms.cern.ch), and the current release may be newer.
- Reviewed with
- Probe by E# (E-Sharp AB)