CONV-TTL-BLO RTM BOARD TESTER
OHWR0034 · revision R1
CONV-TTL-BLO RTM BOARD TESTER (OHWR0034 R1) is an open-hardware circuit board from the CERN Open Hardware Repository, designed in Altium Designer: a 2-layer board of 31.2 × 99.7 mm with 15 components and 5 nets, published under CERN-OHL-1.2.
review complete · 1 finding: 1 minor
Open in the interactive viewerRead the full review

Design review
Probe recorded 1 finding: 1 minor on this design. Each is shown here with its reasoning; the full review links every one to the pins, nets and datasheet pages it rests on.
Schematic title block leaves document number, revision, date, drawer, checker and sheet number as placeholders
The RTM Board Tester schematic title block leaves document number, revision, date, drawer, checker and sheet number as placeholders, so a built tester cannot be tied to this drawing.
The single sheet (rtm-board-tester.SchDoc) names the board "RTM Board Tester" and the designer (Theodor-Adrian Stana), but:
Field Value Document *Drawn by *Check by *Date XX/XX/XXXXSheet * of *Rev *Project/Equipment -Documentation only; it does not affect function.
Main parts
| Part number | Maker | Description | Where |
|---|---|---|---|
| FAA.00.250.NTA | LEMO | LEMO 00 patch panel coaxial connector with fixing nut (FAA.00.250.NTA) | I1, I2, I3, O11, O12, O13 and 6 more |
About this design
- Design
- CONV-TTL-BLO RTM BOARD TESTER — OHWR0034 R1
- Designed in
- Altium Designer
- Board
- 2 copper layers, 31.2 × 99.7 mm, 15 components, 5 nets
- Licence
- CERN-OHL-1.2
- Source
- https://gitlab.com/ohwr/project/conv-ttl-blo-hw at commit
498b1ff562ff - Attribution
- CERN Open Hardware Repository, project conv-ttl-blo-hw (path rtm-board-tester/), commit 498b1ff562ff10fb00f56bebc7e7f603573110a5 (2025-04-09). Licence: CERN-OHL-1.2. Source: https://gitlab.com/ohwr/project/conv-ttl-blo-hw. This is a snapshot of the copy published on the OHWR GitLab pages (R1), not CERN's released record. CERN's source of truth is EDMS (https://edms.cern.ch), and the current release may be newer.
- Reviewed with
- Probe by E# (E-Sharp AB)