Probe E# — E-Sharp AB
Probe is made by E# (E-Sharp AB) in Sweden. Want your own boards reviewed like this? Book a meeting

DIOT CRATE AC INPUT

OHWR0087 · revision R1

DIOT CRATE AC INPUT (OHWR0087 R1) is an open-hardware circuit board from its public repository, designed in Altium Designer: a 2-layer board of 219.6 × 100 mm with 14 components and 8 nets, published under CERN-OHL-W-2.0.

review complete · no findings

Open in the interactive viewerRead the full review

DIOT CRATE AC INPUT (OHWR0087 R1) circuit board, top view: copper, silkscreen and components
Top view, rendered by Probe from the design's own fabrication data.

Design review

Probe has recorded no findings on this design yet.

Main parts

Part numberMakerDescriptionWhere
1N916ON SEMICONDUCTORDiodeD1
236-403WAGOTerminal Block, 3 Positions, Screw ConnectionJ1
40.52.7.024.0000FINDER8A DPDT PCB Relay, 40.52 SerieRL1
51939-576AMPHENOLThru-Hole, Lead 3.43mm, PowerBlade Right Angled Power Connector 8S 5ACP ContactsJ2
RMF_10R_1%_0.6W_50PPM_1016-630X250GENERICResistor - 1%R1
Use only in PCBFiducial TargetFTG1, FTG2, FTG3

About this design

Design
DIOT CRATE AC INPUT — OHWR0087 R1
Designed in
Altium Designer
Board
2 copper layers, 219.6 × 100 mm, 14 components, 8 nets
Licence
CERN-OHL-W-2.0
Source
https://edms.cern.ch/item/EDA-04829-V1-1/0 at commit EDMS EDA-048
Attribution
CERN EDMS item EDA-04829-V1-1 'DI/OT Crate - AC Input': document 3138526 v.1, retrieved 2026-10-18T13:03:45Z. CERN EDA-04829 V1-1, DI/OT Crate - AC Input. Copyright CERN 2023. Licence: CERN OHL-W v2.0+. Project: https://gitlab.com/ohwr/project/diot-crate-hw
Reviewed with
Probe by E# (E-Sharp AB)