Probe E# — E-Sharp AB
Probe is made by E# (E-Sharp AB) in Sweden. Want your own boards reviewed like this? Book a meeting

MICROSTEPPER MIXER

OHWR0077 · revision R1

MICROSTEPPER MIXER (OHWR0077 R1) is an open-hardware circuit board from the CERN Open Hardware Repository, designed in KiCad EDA: a 2-layer board of 100 × 100 mm with 146 components and 93 nets, published under CERN-OHL-S-2.0.

review 95% walked · 4 findings: 3 major · 1 minor

Open in the interactive viewerRead the full review

MICROSTEPPER MIXER (OHWR0077 R1) circuit board, top view: copper, silkscreen and components
Top view, rendered by Probe from the design's own fabrication data.

Design review

Probe recorded 4 findings: 3 major · 1 minor on this design. Each is shown here with its reasoning; the full review links every one to the pins, nets and datasheet pages it rests on.

  1. PartLifecyclemajorOpen

    LT1963AEQ on U107: the distributor catalogue reports "Obsolete" for Analog Devices Inc.'s LT1963AEQ

    LT1963AEQ on U107: the distributor catalogue reports "Obsolete" for Analog Devices Inc.'s LT1963AEQ — a sourcing/longevity risk to confirm against the MANUFACTURER before acting. This board's BOM names no manufacturer for it, so whether that is the fitted maker's product was not checked. A distributor delisting is not the same claim as the part being unavailable; check the vendor's own lifecycle/product-change notice for the status and any named successor. Re-read the source: GET /api/odb/parts/LT1963AEQ/providers (which provider said it, the maker and part number it matched, its own words, and when we asked). No approved alternate is recorded for this position.

    At U107

  2. FiducialMissingmajorOpen

    The top side carries 137 SMT component(s) and no fiducial was found on it

    The top side carries 137 SMT component(s) but no fiducial was found on it — a placement machine has no optical reference to align to. Probe found no pad labelled .pad_usage=g_fiducial/l_fiducial (basis pad_usage); no single-pad, netless, undrilled component whose 0.5-3 mm round pad has a concentric solder-mask opening at least 1.5x its diameter with no other copper inside it (basis geometry); and no component whose refdes starts FID or whose part or package name contains FIDUCIAL (basis footprint-name). If your library names fiducials something Probe does not recognise, mark this benign — disposition_finding(rule='FiducialMissing', entity='top', status='benign', reason=…) — the name match only ever silences this check, it never asserts anything. If the side really has no fiducial, say so with status='confirmed': that answers the finding and keeps it gating release.

    At top

  3. ReferencePlaneDiscontinuitymajorOpen

    Tracks on B.CU and F.CU cross each other at 17 places, each layer the other's reference with its pour cleared round its own tracks, the longest 9.59 mm; 3 run ALONG the cut round another net's track (fastest: /Carrier_input at 100 ps 10-90 %, ASSUMED)

    B.CU and F.CU each carry a pour and routed tracks, and each is the other's nearest reference. Wherever a track on one crosses a track on the other, the pour under it is cleared round that other track, so for the width of the cut the return has no plane under it and detours round the cut. 17 place(s) on 13 net(s), 1 of them seen from both tracks (each counted once). 3 of the crossings run ALONG the cut round another net's track rather than across it, parallel to its edges (the longest 2.08 mm): over or right beside that track, broadside to it as well as off the plane. One decision covers the layer pair: whether these layers may take a pour their own tracks cut as the reference, or the routing or the stackup should give the tracks a plane that is not cut where they cross. No crossing has a plane on the track's other side, so the whole return meets the break.

    • '/Modulated_input' on F.CU at (147.14, -107.6), 9.59 mm, running ALONG the bare copper for 2.08 mm, not across it over copper of -5V, /U8_+5V, not a plane, to the end of the track; other side: none: the signal layer is outermost
    • one crossing of two tracks, seen from each: 'Net-(C14-Pad2)' on B.CU at (115.17, -129.17), 4.73 mm, running ALONG the bare copper for 0.84 mm, not across it over copper of Net-(C5-Pad1), not a plane, to the end of the track; other side: none: the signal layer is outermost / 'Net-(C5-Pad1)' on F.CU at (113.47, -128), 1.64 mm over copper of Net-(C14-Pad2), not a plane; other side: none: the signal layer is outermost
    • 'Net-(R5-Pad2)' on F.CU at (144.5, -85), 3.24 mm over copper of -5V, not a plane; other side: none: the signal layer is outermost
    • 'Net-(C22-Pad1)' on F.CU at (182.34, -111.86), 3.14 mm over copper of +VIN, not a plane; other side: none: the signal layer is outermost
    • '/Carrier_input' on F.CU at (147.5, -121), 2.86 mm over copper of -5V, not a plane; other side: none: the signal layer is outermost
    • 'Net-(C11-Pad2)' on F.CU at (113.23, -99), 2.56 mm, running ALONG the bare copper for 1.55 mm, not across it over copper of +5V, not a plane, to the end of the track; other side: none: the signal layer is outermost
    • '/Carrier_input' on F.CU at (150.5, -124.5), 2.23 mm over copper of +5V, not a plane; other side: none: the signal layer is outermost
    • 'Net-(C7-Pad1)' on F.CU at (124.5, -92.5), 2.23 mm over copper of +5V, not a plane; other side: none: the signal layer is outermost
    • '/Modulated_input' on F.CU at (138, -108.35), 2.02 mm over copper of +5V, not a plane; other side: none: the signal layer is outermost
    • 'Net-(R15-Pad1)' on F.CU at (127.61, -134.05), 1.28 mm over copper of /U4_+5V, not a plane; other side: none: the signal layer is outermost
    • '/Modulated_input' on F.CU at (123.98, -106.98), 1.27 mm over copper of /Demod_out, not a plane; other side: none: the signal layer is outermost
    • '/Carrier_input' on F.CU at (152, -131.74), 1.27 mm over copper of /U9_+5V, not a plane; other side: none: the signal layer is outermost
    • and 5 more

    Every site is a row of this finding's evidence, keyed by net, layers and position. GET /api/odb/boards/78/reference-planes?group=void%3Arouted%40B.CU%7CF.CU serves each with its own layer_image region; all of them lie in x 111.45..184.76, y -135.05..-72.5 mm (board frame, Y up).

    Read from the copper as drawn on the reference layer, along each track's centreline at exact breakpoints. The reference is the copper beside the track, never the layer's type or name. Whether it matters depends on each signal's edge rate, which nothing on file states for these nets: a slow static line crosses a split harmlessly, a fast edge does not.

    At void:routed@B.CU|F.CU

  4. observationOBS-443minorOpen

    MIXER silkscreen: U104 designator printed ~0.5 mm high (below the ~0.8 mm floor) and R15 printed over C28

    MIXER silkscreen: the U104 designator is printed about 0.5 mm high, below the ~0.8 mm floor, and R15 is printed over C28.

    • Beside the LMH6702 U104 (SOT-23-5, near C8/R15/R48, around x 128-131, y -128 mm) the "U104" designator is roughly 0.5 mm character height (~40 px at 75 px/mm, ~0.53 mm) with ~0.1 mm stroke.
    • That is about half the board's normal ~1 mm text, and will likely not print legibly.
    • Immediately above it the vertical "R15" designator runs across the last character of "C28", so the two read as one smudge.

Main parts

Part numberMakerDescriptionWhere
74AHC1G4210U108
AD630ARZU112
ADE-6U105
LT1963AEQU107
LT3015QU111
ADA4898-1YRDZU109, U110
BNX025FL103, FL104
MC12093DU102, U103
BAT54SWD101, D102, D103
LMH6702MFU101, U104, U106

About this design

Design
MICROSTEPPER MIXER — OHWR0077 R1
Designed in
KiCad EDA
Board
2 copper layers, 100 × 100 mm, 146 components, 93 nets
Licence
CERN-OHL-S-2.0
Source
https://gitlab.com/ohwr/project/microstepper at commit 46ae03051ab5
Attribution
CERN Open Hardware Repository, project ohwr/project/microstepper (commit 46ae03051ab5b384582b0fa5100d2e5447509ebe, 2025-04-08). Licence: CERN-OHL-S-2.0. Source: https://gitlab.com/ohwr/project/microstepper. This is a snapshot of the copy published on the OHWR GitLab pages (R1), not CERN's released record. CERN's source of truth is EDMS (https://edms.cern.ch), and the current release may be newer.
Reviewed with
Probe by E# (E-Sharp AB)